Hunter 47905 Owner's Manual page 16

10. When you have completed scheduling your day, you will be returned to the copy
day screen. The copy day screen will now show
copy the day you just scheduled to any other days. Select
days you wish to add the schedule too. Press the
and return to the home screen, or
individually.
11. Select each day you wish to copy the schedule to by touching it on the screen
directly. The arrow indicators beside each day you select will show to indicate the
day has been selected. In figure 12 you will see Tue - Fri have been selected.
Note: The original day scheduled will not show on the screen as it is the one being
copied. You may use a pen or other small instrument to select the days if necessary.
12. Press
Done
and return you to the day select screen to program another day if any are left
unprogrammed. Repeat steps 3-12 until all days are scheduled. Pressing
any time will return you to the home screen without saving changes.
Note: If you choose NO, then you will be prompted to select the next day to program,
bypassing the copy function. Repeat steps 3-11 for each day you want to program
separately.
13. Once all days are programmed, you will be taken back to the Home Screen. If
you need to make any changes, press the
16
Setting Your Schedule
on the screen and it will flash "Mon copied to (days selected)"
to save changes and select a new day
Done
Schedule button to reenter schedule edit mode.
44119-01 • 10/10/2012
and ask you if you wish to
Copy
day to...
and choose the
Copy
day to...
button to ignore changes
Cancel
at
Cancel