Timer Recording With Showview; System; Checking Timer Recording Details; Canceling A Timer Recording - Philips RCP7005TP2L Owner's Manual

This system makes programming timer recordings very
simple. Most TV guides publish S
numbers with their program details.If you want to make
a timer recording of a program, you just input the corre-
sponding S V programming number. The date,
HOW IEW
start, stop and channel settings are made automatically.
All you have to do is tell the recorder the recording
mode and quality, and whether it's a once-only record-
ing, or a regular recording.
Up to 8 timer programs can be stored in the recorder.
Press SHOWVIEW.
1 1
The S V menu will appear.
HOW IEW
Press SHOWVIEW again to exit the menu.
S V
HOW IEW
Number
0-9 Input OK Delete
OK CLEAR
Use the number buttons then press OK to enter
2 2
the S V programming number.
HOW IEW
• If you make a mistake before pressing OK, press
CLEAR repeatedly to delete password numbers
one by one then correct it.
To check the programming, the Timer Record menu
will appear.
Timer Record
Media PR Date Start Time
DVD 9 16/05 Sun 10:07
C07
OK TIMER
OK
You can change the settings as required (Mode,
VPS/PDC, etc.)
Follow steps 2-5 as shown on previous page
3 3
(Timer Recording).
Timer Recording with S
V programming
HOW IEW
Close
198 min Free
SP
VPS/
End Time Mode
PDC
11:00 SP ON
Timer Record List Close
HOW

Checking Timer Recording Details

Programming can be checked whenever the Recorder
is turned on. Press TIMER twice.
• Use v / V to select a timer recording.
• Press OK to edit the selected program.
Timer Record menu appears.
• Press CLEAR to delete the selected program
from the Timer Record List.
Timer Record List
Media PR Date Start Time Duration
11 16/05 Sun 10:12
Edit CLEAR Delete
OK

Canceling a Timer Recording

You can clear a timer setting anytime before the record-
ing actually starts.
• Use v / V to select a program you want to erase on
the Timer Recorder List. If you want to erase the
program, press CLEAR.

Stopping a Timer Recording in Progress

After a timer recording has started, you can still cancel
the program.
• Press 1 1 .

Timer Recording Troubleshooting

Even though the timer is set, the recorder will not
record when:
• There is no disc (or tape) loaded.
• A non-recordable disc (or tape) is loaded.
• Disc Protect is set to ON in the Setup menu
(see page 30).
• Power is turned on. (Please ensure that the set is in
Standby mode for Timer recording to activate.)
• There are already 49 titles recorded on the disc.
You cannot enter a timer program when:
• A recording is already underway.
• The time you're trying to set has already passed.
• There are already 8 timer programs set.
If two or more timer programs overlap:
• The earlier program takes priority.
• When the earlier program finishes, the later program
starts.
• If two programs are set to start at exactly the same
time, the program entered first takes priority.
If the disc is damaged, the recording may not complete
successfully. In this case even though the Check field
shows "Rec. OK", it may not be.
V ®

System

IEW
VPS/
Mode Check
PDC
30min SP ON Rec. OK
Timer Rec Close
TIMER
47