Timer Recording With Video Plus+ System; Checking Timer Recording Details; Canceling A Timer Recording; Stopping A Timer Recording In Progress - Philips DVDR3320V/05B User Manual

This system makes programming timer recordings very
simple. Most TV guides publish the PlusCode program-
ming numbers with their program details.If you want to
make a timer recording of a program, you just input the
corresponding PlusCode programming number. The
date, start, stop and channel settings are made auto-
matically. All you have to do is tell the recorder the
recording mode and quality, and whether it's a once-
only recording, or a regular recording.
Up to 8 timer programs can be stored in the recorder.
Press VIDEOPLUS+.
1 1
The VIDEOPLUS+ menu will appear.
Press VIDEOPLUS+ again to exit the menu.
VIDEO Plus+
Number
0-9 Input OK
OK CLEAR
Use the number buttons then press OK to enter
2 2
the PlusCode programming number.
• If you make a mistake before pressing OK, press
CLEAR repeatedly to delete password numbers
one by one then correct it.
To check the programming, the Timer Record menu
will appear.
Timer Record
Media PR Date
DVD 9 16/05 Sun
C07
OK
OK
You can change the settings as required (Mode,
PDC, etc.)
Follow steps 2-5 as shown on previous page
3 3
(Timer Recording).

Timer Recording with VIDEO Plus+ System

Delete Close
198 min Free
SP
VPS/
Start Time End Time Mode
PDC
10:07 11:00 SP ON
TIMER Timer Record List Close

Checking Timer Recording Details

Programming can be checked whenever the Recorder
is turned on. Press TIMER twice.
• Use v / V to select a timer recording.
• Press OK to edit the selected program.
Timer Record menu appears.
• Press CLEAR to delete the selected program
from the Timer Record List.
Timer Record List
Media PR Date Start Time Duration
11 16/05 Sun 10:12
OK Edit CLEAR Delete

Canceling a Timer Recording

You can clear a timer setting anytime before the record-
ing actually starts.
• Use v / V to select a program you want to erase on
the Timer Recorder List. If you want to erase the
program, press CLEAR.

Stopping a Timer Recording in Progress

After a timer recording has started, you can still cancel
the program.
• Press STANDBY-ON.

Timer Recording Troubleshooting

Even though the timer is set, the recorder will not
record when:
• There is no disc (or tape) loaded.
• A non-recordable disc (or tape) is loaded.
• Disc Protect is set to ON in the Setup menu
(see page 30).
• Power is turned on. (Please ensure that the set is in
Standby mode for Timer recording to activate.)
• There are already 49 titles recorded on the disc.
You cannot enter a timer program when:
• A recording is already underway.
• The time you're trying to set has already passed.
• There are already 8 timer programs set.
If two or more timer programs overlap:
• The earlier program takes priority.
• When the earlier program finishes, the later program
starts.
• If two programs are set to start at exactly the same
time, the program entered first takes priority.
If the disc is damaged, the recording may not complete
successfully. In this case even though the Check field
shows "Rec. OK", it may not be.
VPS/
Mode Check
PDC
30min SP ON Rec. OK
TIMER Timer Rec Close
47