3
Select "ONCE", "DAILY" (Mon-Fri) or "WEEKLY".
Then press [B] to go to next step.
or
4
Select the desired date.
Then press [B] to go to next step.
or
or
• You can program the Unit to record up to 8 programs, for up to
a year in advance.
5
Select the desired starting time (hour).
Then press [B] to go to next step.
or
or
6
Select "AM" or "PM".
Then press [B] to go to next step.
or
7
Repeat the procedure in steps 5 and 6 to set the ending time.
8
Select "L1" or "L2".
Then press [B] to go to next step.
or
Notes for Timer Recording & One-touch Timer Recording (OTR)
• If a cassette tape is not in the Unit or does not have the erasure prevention tab, TIMER REC indicator on this Unit blinks and timer
recording cannot be performed. Please insert a recordable cassette tape.
• When timer recordings are set, TIMER REC indicator on this Unit lights up. To use the VCR as usual, until the time for the recording,
press [TIMER SET] so that TIMER REC indicator light turns off.
After a one-touch timer recording or a timer recording has been set, this Unit operates as described below:
• If a cassette tape runs out before a one-touch timer recording or a timer recording is finished, the Unit ejects the cassette tape. Press
[TIMER SET] on the Remote Control or [STOP/EJECT C A] on the Unit, then press [VCR] to activate the VCR function again.
• Once the Unit turns to the timer standby mode, no VCR functions are available until [TIMER SET] is pressed.
• To cancel the timer standby mode, press [TIMER SET] on the Remote Control or [STOP/EJECT C A] on the Unit, then press
[VCR] to activate the VCR function again.
When an one-touch timer recording or a timer recording is completed...
• TIMER REC indicator on this Unit flashes if there are no more timer recordings on standby.
• The Unit goes to the DVD mode and all the VCR functions will be unavailable. All the DVD functions are available during one-touch
timer recording, timer standby mode and timer recording.
• Press [STOP/EJECT C A] on this Unit or [TIMER SET] on the Remote Control to use the VCR when the Unit is turned off.
• Press [SOURCE] on this Unit or [VCR] on the Remote Control to use the VCR when the Unit is turned on. In case timer recording
is in standby mode, press [STOP/EJECT C A] on this Unit or [TIMER SET] on the Remote Control and then press [SOURCE]
on this Unit or [VCR] on the Remote Control.
If you want to use the DVD player during a timer recording or while TIMER REC indicator on this Unit is
on or blinking. g
• Press [Q] to turn on the Unit. Press [DVD] on the Remote Control to choose DVD mode, then continue with the other DVD
features as described in this manual.
Note for timer recording:
If there is a power failure or the Unit is unplugged for more than 30 seconds, clock time setting and ALL timer programs will be lost.
•
When power is restored or Unit is plugged in again the clock and timer programs will need to be set up again.
EN
PROGRAM NUMBER 1
B ONCE
DAILY
WEEKLY
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
1 0 / 0 2 TUE
START TIME – – : – –
– –
END
TIME – – : – –
– –
L1/L2
– –
REC
SPEED – –
Note(s):
ONE TIME PROGRAM
PROGRAM NUMBER 1
To check, correct or cancel a timer program
DATE
1 0 / 0 2 TUE
START TIME 0 7 : 3 0
– –
END
TIME – – : – –
– –
1) Press [TIMER SET], then [VCR] on the Remote Control.
L1/L2
– –
REC
SPEED – –
2) Press [SETUP] to call up the main menu.
3) Select "TIMER PROGRAMMING" by using [ K / L], then press
4) Select the program number which you want to check by using
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
1 0 / 0 2 TUE
UE
START TIME 0 7 : 3 0
PM
PM
END
TIME – – : – –
– –
– –
L1/L2
– –
REC
SPEED – –
AM
B PM
5) Press [CLEAR] to exit.
6) Press [TIMER SET] to return to the timer standby mode.
ONE TIME PROGRAM
PROGRAM NUMBER 1
To cancel a timer recording in progress
DATE
1 0 / 0 2 TUE
START TIME 0 7 : 3 0
PM
END
TIME 0 8 : 3 0
PM
Press [STOP/EJECT C A] on the Unit.
L1/L2
L1
REC
SPEED – –
g
g
g
– 17
–
–
9
Select recording speed.
Then press [CLEAR].
• To set another program after step 9, press [B].
Then continue with step 2.
10
Press [TIMER SET] to set the timer standby mode.
• TIMER REC indicator on this Unit lights up and the Unit goes to
the DVD mode.
• To go back one step, press [s] during steps 3 to 9.
• Select "L1" to activate rear input jacks. Select "L2" to activate front input
jacks.
[ B].
[ K / L]. The details of the program you selected will appear
on the TV screen.
• Go to the digit you want to change by using [s / B]. Then,
enter correct numbers by using [ K / L].
• You may cancel the entire program by pressing [s] while
the program number blinks.
g
p
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
1 0 / 0 2 TUE
START TIME 0 7 : 3 0
END
TIME 0 8 : 3 0
L1/L2
L1
REC
SPEED SP
B SP
SLP
p g
g
p g
p
Continued on next page.
PM
PM