Advertisement
KDC-BT40U/BT645U
KDC-U546BT
Key
■BAND BT device search
Audio data
initialization
Clear the BT related
memory information
■
*1
Forced Power OFF
information display
■
VOICE
CD information
display mode
ON/OFF
■VOICE
Information display
iPod authentication
SEARCH
IC installation
condition display
■SEARCH Preout switching
All lights ON /
RETURN
All lights OFF
*1: This is a function to clear the information recorded in the fl ash memory, to clear the data fl ash ROM that has BT memory information to be
initialized with the "Data fl ash ROM clear" function, and to write the specifi c values in the ROM to initialize it to its factory default condition.
• Factory default condition
· To clear the pairing information (in the fl ash memory of the BT module)
· To clear the preset telephone numbers (in the data fl ash ROM)
· To write "KENWOOD BT CD/R-3P2" in the friendly name (in the fl ash memory of the BT module)
· To write "0000" in the PIN code (in the fl ash memory of the BT module)
10
TEST MODE
Description of display
(The display blinks)
S
E
A
R
C
H
I
N
G
X
X
X
X
X
X
X
X
X
U
N
K
N
O
W
N
A
U
D
I
O
I
N
I
I
N
I
T
I
A
L
I
Z
B
T
I
N
I
T
B
T
I
N
I
T
P
O
F
F
–
–
–
P
O
F
F
P
N
L
Transition to the CD information
display mode (sub-mode)
Clear all of the CD information
i
P
o
d
i
P
o
d
i
P
o
d
i
P
o
d
S
W
P
R
E
R
S
W
P
R
E
S
÷
÷
÷
÷
÷
÷
÷
÷
÷
÷
Press and hold this key for 1 second to initiate the BT device
search.
The search is terminated when 1 device is found.
When a device is found after the search, the name of that
X
X
X
X
device is displayed.
Only when no device is found after the search, press the
[ROTARY] key briefl y to re-initiate the search.
After the completion of the search, press and hold the [BAND]
key for 1 second to exit from the test mode.
Audio setting value is re-set to the Test mode default value.
T
Press and hold this key for 2 seconds.
The character string as shown in the left cell is displayed
E
while the BT related memory is being initialized.
This is to initialize the BT related memory to its factory de-
fault condition.
: O
K
When the initialization is successfully completed, "OK" (up-
: N
G
per) is displayed, and when the initialization is abnormally
completed, "NG" (lower) is displayed.
No forced Power OFF
Forced power OFF by communication error between system
μ-com and panel.
While the forced power OFF data is displayed, press and
hold for 2 seconds to clear the data.
∗Refer to "CD information display mode" for the details of
display and operation procedure. Press [VOICE] key briefl y.
Press and hold this key for 2 seconds in the CD information
display mode to clear all of the CD information.
Press and hold the [VOICE] key.
iPod authentication IC installation condition display
When the display in the left cell is shown, press this key to
:
return to the normal display.
: O
K
Blank: Searching and deciding the present status.
OK: Authentication IC has been installed.
: N
G
NG: This is the iPod compatible model, but the
: ∗
∗
authentication IC is not yet installed.
∗ ∗: This is not the iPod compatible model.
E
A
R
Pressing and holding this key for 1 second switches the
preout.
U
B
–
W
÷
÷
Switch from "All lights ON" to "All lights OFF" and vice
versa.
÷
÷
Description
Advertisement
