E8A21UD_EN1 5/29/06 3:13 PM Page 31
Setting Up the VCR Plus+
To have the VCR Plus
Channels given to each TV/CATV stations.To do so, follow the steps below.
1
First, fill in the boxes on this page.
Since the channel numbers of the stations you receive may not be the same as the station numbers,
and since channel numbers differ from area to area, you must program the VCR with your local
channel information.To fill in the boxes, you will need 1) a cable channel list, if applicable (you can
request one from your cable company), and 2) a chart that lists VCR Plus+ channel numbers (Guide
channels), which you can find in your TV guide or the TV listings of your local newspaper.
NOTE: If you are using a Cable Box/DBS, the User channel must be 3 or 4 (the Cable
Box/DBS output channel) for every Guide channel.
Station
Call Letters
Instructions continue on the next page.
®
+
programming system work properly, you must assign correct User Channels to the Guide
Channels
GUIDE CH.
USER CH.
Programming System Manually 31
Station
Call Letters
Channels
GUIDE CH.
USER CH.