Philips DVP3200V/37 User Manual page 10

E8A21UD_EN1 5/29/06 3:13 PM Page 10
10 Hookups (cont'd)
This connection will let you use the features of both the VCR and the DVD player.
1
Cable Box/Satellite Receiver
IN
Cable
Signal
RF coaxial cable
Connections
1
Connect a Cable TV or Satellite signal to the IN
jack on the Cable Box/Satellite Receiver.
2
Use an RF coaxial cable (as the one supplied) to
connect the OUT jack on the Cable Box/Satellite
Receiver to the ANT -IN (Antenna In) jack on the
DVD/VCR.
3
Use a second RF coaxial cable to connect the
ANT -OUT (Antenna Out) jack on the DVD/VCR to
the TV's Antenna In jack.
4
Plug in the power cord of your TV. Turn on the TV
and set it to channel 3 or 4.
5
Plug in the power cord of the DVD/VCR. You are
ready to turn on the DVD/VCR. Go to page 16
before turning it on.
Remember...
There are two ways to connect your Cable Box/Satellite Receiver
to the DVD/VCR. With the connection on this page:
●
Select TV channels at the Cable Box/Satellite Receiver, not the
DVD/VCR. To record or view TV channels, follow these steps:
1) Press VCR to put the DVD/VCR in VCR mode. VCR light will
appear on the front of the DVD/VCR.
2) Press CH + or CH - to set the DVD/VCR to the Cable
Box/Satellite Receiver output channel (03 or 04).
3) Set the TV to the DVD/VCR's output channel (03 or 04).
The DVD/VCR's output channel is channel 3 as a default. To
change it from 3 to 4, press and hold PLAY B (VCR) on the
DVD/VCR for 3-5 seconds during tape playback. For more
details, see step 4 on page 9.
4) Select the channel you want to view/record at the Cable
Box/Satellite Receiver.
●
You may not view a channel other than the one you are recording.
●
You can only program a timer recording for one channel at a time.
Set your Cable Box/Satellite Receiver to the channel you want to
record. When you enter the channel you want to record in a
timer recording, select channel 03 or 04 (the Cable Box/Satellite
Receiver output channel). (This is step 8 on page 28.) Leave the
Cable Box/Satellite Receiver on for a timer recording.
DVD/VCR to Cable Box or Satellite Receiver and TV
Using only basic RF coaxial cables
2
OUT
DVD DVD/VCR VCR
DIGITAL AUDIO S-VIDEO COMPONENT AUDIO OUT AUDIO IN
VIDEO OUT
AUDIO OUT OUT OUT
Y L L
L
C /
B R R
P
B
COAXIAL
VIDEO OUT VIDEO IN
R
C R /
P
R
DVD/VCR
ANT - IN
RF coaxial cable
ANT-OUT
• If your Cable Box or Satellite
Receiver has Audio and Video
Out jacks, use audio and video
cables to connect them to the
VCR AUDIO IN and VIDEO IN
jacks on the rear of the
DVD/VCR. You will not need
the RF coaxial cable connection
between the Cable Box/Satellite
Receiver and the DVD/VCR as
described at step 2.
7 5
A N T
/
C A B
L E
3
TV's ANTENNA
IN Jack
Helpful Hint