Fx 1S; Fx Run/Stop Control - Mitsubishi FX1S-10MR-ES/UL Hardware Manual

FX1S Series Programmable Controllers
3.2 FX RUN/STOP Control
1S
RUN or STOP of the FX
nThe RUN/STOP switch mounted next to the programming port.
oA standard input (X0 to X17) defined by the system parameters.
pRemotely from a personal computer or other programming peripheral.
Note:The FX
refer to Table 3.2.
During remote operation the FX
operated control.
E.g. If the RUN/STOP switch is in RUN and a remote STOP is made from a personal
computer, the PLC can only be restarted with the RUN/STOP switch by first moving the
switch to STOP and then back to RUN.
Figure 3.2: RUN/STOP Input Wiring Diagram
S/S 0V 24V X0
can be controlled by:
1S
RUN/STOP switch works in parallel with the RUN input terminal. Please
1S
RUN/STOP status is determined by the most recently
1S
Table 3.2: Run Status Table
RUN
X1 X2
n o
RUN/STOP RUN INPUT
SWITCH TERMINAL
9 9
9
9
Installation Notes 3
FX MPU
1S
STATUS
RUN
RUN
STOP
RUN
3-3