Connecting To A Vcr Or Other Similar Device - Philips DVDR3435H User Manual

r
Connecting to a VCR or
other similar device
This connection enables you to record
from a video tape to the HDD or a DVD
recordable disc and allows the VCR to be
e used for playback if the recorder is
turned off.
IMPORTANT!
Your new recorder can replace the
VCR for all your recording needs.
Just unplug all the connections to
your VCR.
A
Connect the Antenna/Cable TV signal to
the ANTENNA IN jack on the
recorder.
B Use a RF coaxial cable to connect the
ANTENNA OUT jack on the
recorder to the Antenna input jack on
your TV (VHF/UHF RF IN.)
O
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
Step 2: Optional Connections
VHF/UHF
RF IN
VHF/UHF
RF OUT
from the power outlet.
IN
OUT
VIDEO
VIDEO
OUT
IN
AUDIO AUDIO
L L
AUDIO AUDIO
R
R
C
D
C Use the audio/video cables to connect
the VIDEO/AUDIO IN on the
recorder to the matching VIDEO/
AUDIO output jacks on the VCR.
D Use the audio/video cables to connect
the VIDEO/AUDIO -OUT on the
recorder to the matching VIDEO/
AUDIO input jacks on the TV.
Helpful Hints:
– Most commercial video cassettes and
DVDs are copy-protected and therefore
cannot be recorded.
– Connect the recorder directly to the
TV. If there is a VCR or an additional device
in between, the picture quality may be poor
because of the copy protection system built
into the recorder.
(continued)
Back of a VCR
(Example only)
CABLE
SATELLITE
ANTENNA
A
B
19