Setting User Login Administration; Authentication Security; User Account Lockout Setting - Kyocera ECOSYS M5521cdn Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Setting User Login Administration

This registers, alters and deletes users and configures the settings for User Login Administration.

Authentication Security

If user authentication is enabled, configure the user authentication settings.

User Account Lockout Setting

You can prohibit the use of a user account if an incorrect password is entered repeatedly to login with that account.
1
2
Display the screen.
1
[System Menu/Counter] key > [▲] [▼] key > [User/Job Account] > [OK] key
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name:
Login Password:
2
[▲] [▼] key > [User Login Set.] > [OK] key > [▲] [▼] key > [Account Lockout] > [OK] key
Configure the settings.
The following settings can be selected.
Item
Lockout
Lockout Policy
Number of
Retries
Lockout Duration
Lockout Target
Locked out Users
2100
2100
Select whether or not account lockout policy is enabled.
Value: Off, On
Specify the conditions and the extent to which the account lockout is
applied.
Specify how many login retries are allowed until the account is locked out.
Value: 1 to 10 times
Specify how long the account is to be locked out until it is unlocked.
Value: 1 to 60 minutes
Specify the extent to which the account lockout is applied. [Remote Only]
locks out all operations from outside the operation panel.
Value: All, Remote Only
Displays a list of locked out users.
To cancel the locks:
Select the [▲] or [▼] key to select the user in the list, and [Select]. A
checkmark will be placed on the right of the selected user.
Select [Menu]. Select [Unlock] and the [OK] key.
9-5
Descriptions