Enabling User Login Administration - Kyocera ECOSYS M5521cdn Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Enabling User Login Administration

Enabling User Login Administration

Select one of the following authentication methods:
Item
Local Authentication
Network Authentication
1
2
User authentication based on user properties on the local user list stored in the
machine.
User authentication based on Authentication Server. Use a user property stored
in Authentication Server to access the network authentication login page.
Display the screen.
1
[System Menu/Counter] key > [▲] [▼] key > [User/Job Account] > [OK] key
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name:
Login Password:
2
[▲] [▼] key > [User Login Set.] > [OK] key
Configure the settings.
1
[▲] [▼] key > [User Login] > [OK] key > [▲] [▼] key >
[Local Authentic.] or [Netwk Authentic.] > [OK] key
NOTE
Select [Off] to disable user login administration.
When selecting [Netwk Authentic.]
1
[▲] [▼] key > [NTLM], [Kerberos] or [Ext.] > [OK] key
2
Enter the host name (64 characters or less) for the Authentication Server and select the
[OK] key.
3
Select the domain name for the Authentication Server, and select the [OK] key.
If the domain has not been set, select the number where "----------------" is displayed and select
[Menu]. Select [Edit] and select the [OK] key then enter the domain name (in 256 characters or less).
Select the [OK] key and the domain will be registered.
To edit or delete a domain name that has already been registered, select that domain name and
select [Menu].
NOTE
Up to 10 domain names can be registered.
Descriptions
2100
2100
9-3