Preparation Flow; Operation Flow; Checking The Cable Connection - Konica Minolta bizhub C368 Quick Start Manual

3

Preparation flow

The following describes a preparation flow to print data. For details, refer to the relevant page.
This preparation is not required the second time or subsequent times.
1
Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the network cable. For details, refer to page 3-8.
2
Checking network settings of this machine (Administrator)
% Check the network settings of this machine. For details, refer to page 3-9.
The network can be used with the default settings unless otherwise requested.
3
Installing the printer driver
% Install the printer driver on the computer. For details, refer to page 3-10.
4
Adding and configuring a printer driver
% Set up your computer so that data can be printed using the installed printer driver. For details, refer
to page 3-13.

Operation flow

The following describes a flow to print data from your computer. For details, refer to page 3-15.
1
Opening original data
% Open the data you want to print using the application software.
2
Configuring the printer driver for printing
% Select a printer driver, and change the setting if necessary before printing.

Checking the cable connection

Check that a LAN cable is connected to the LAN port of this ma-
chine and the green LED is on.
3-8
Print function 3.1
bizhub C368/C308/C258