Meaning Of The Error Codes - Philips EP4051 User Manual

If the display shows an error
10
code, check section 'Meaning
of the error codes' to see
what the code on the display
xx
means and what you can do.
The machine cannot be used
when this icon is on the
display.

Meaning of the error codes

Error code Problem
01 The coffee grinder is
blocked
03 - 04 There is a problem
with the brew group.
05 There is a water
circuit problem.
Below you find a list of the error codes showing problems that you can solve
yourself. Support videos are available on www.philips.com/coffee-support.
If another error code appears, please contact the Philips Consumer Care
Center in your country. For contact details, see the warranty leaflet.
Cause
The coffee exit duct is
clogged.
The brew group is
dirty or not well
greased.
The brew group is not
positioned correctly.
There is air in the
water circuit.
Possible solution
Switch off the machine. Clean the
coffee exit duct thoroughly with the
handle of the measuring spoon or a
spoon handle. Then switch the
machine on again.
Switch off the machine. Rinse the
brew group with fresh water, let it air-
dry and then lubricate it (see
'Lubrication'). Then switch the
machine on again.
Switch off the machine. Remove the
brew group and reinsert it. Make sure
the two reference signs on the side
match before you slide the brew
group back into the machine (see
'Reinserting the brew group'). Then
switch the machine on again.
Switch off the machine. Make sure
you insert the water tank into the
machine properly. Check if the water
tank compartment is clean and free
from coffee beans. Then switch the
machine on again.
Restart the machine by switching it
off and on again. Try to dispense 2-3
cups of hot water.
English
23