Table of Contents
Advertisement
PREVENTIVE MAINTENANCE
MAINTENANCE SCHEDULE
ACTION
CLEAN
FRAME
INSPECT
FRAME
PAINT
HARDWARE
ACCESSORIES
CLEAN:
•
Frame with a mild soap and water.
INSPECT:
•
All paint chips should be filled in immediately with HAMMER STRENGTH touch-up paint.
•
Hardware should be checked for looseness, tampering or wear. Tighten/replace as required.
•
Frames should be inspected for wear and damage.
•
Straps for Power Rack Flexible Bar Catches to be inspected for cuts, frays, or other damage. Any strap showing
sign of damage should be replaced immediately.
LIFE FITNESS APPROVED CLEANERS (United States availability only)
Two preferred cleaners have been approved by LIFE FITNESS reliability experts: PureGreen 24 and Gym Wipes. Both
cleaners will safely and effectively remove dirt, grime and sweat from equipment. PureGreen 24 and the Antibacterial
Force formula of Gym Wipes are both disinfectants that are effective against MRSA and H1N1.
PureGreen 24 is available in a spray which is convenient for gym staff to use. Apply the spray to a microfiber cloth and
wipe down the equipment. Use PureGreen 24 on the equipment for at least 2 minutes for general disinfection purpos-
es and at least 10 minutes for fungus and viral control.
Gym Wipes are large, durable pre-moistened wipes to use on the equipment before and after workouts. Use Gym
Wipes on the equipment for at least 2 minutes for general disinfection purposes. Contact Customer Support Services
to order these cleaners. Call: 1-800-351-3737 or email: customersupport@lifefitness.com).
LIFE FITNESS COMPATIBLE CLEANERS
Mild soap and water or a mild non-abrasive household cleaner can also be used to clean exterior surfaces. Use a soft
cotton cloth only. Apply the cleaner to the cotton cloth before cleaning. DO NOT use ammonia or acid based cleaners.
DO NOT use abrasive cleaners. DO NOT use paper towels. DO NOT apply cleaners directly to the equipment surfaces.
REMOVAL OF PAINT, MARKING PEN AND LABELS
Butyl cellosolve works well for removal of paints, marking pen inks, lipstick, etc.
Labels, stickers, etc. may be removed using kerosene. When the solvent will not penetrate sticker material, apply heat
(hair dryer) to soften the adhesive and promote removal. GASOLINE SHOULD NOT BE USED.
WEEKLY
MONTHLY
X
X
X
X
X
AS NEEDED
7
Hide quick links:
Advertisement
Table of Contents
