Image Defects - Pantum P3010 SERIES User Manual

Too many papers in paper tray.
The print media is out of the
supported media range.
There is foreign matter in the paper path.
Paper
Jam
The feed roller is dirty.
Internal parts failure.
Excessive static electricity on
the print media.
Print
The print media is damp and is
multipage
sticking together.
feed
Internal parts failure.
• If the problem still cannot be solved, please contact the customer services center.
Note：

11.3.2.Image Defects

Problem
The printout is
whitish or light
Toner spots
Cause
• The print media does not meet the
usage specifications, for example
the media is damp or too rough.
• The resolution setting of printing
program is too low and concentration
setting is too low, or save toner
mode is ticked.
• Toner is low.
• Toner cartridge is damaged.
• Dirty toner cartridge or toner leakage.
• Toner cartridge is damaged.
• The print media does not meet the
usage specifications, for example
the media is damp or too rough, or
has been used previously.
• The paper path is dirty.
Take the excessive papers out from
paper tray; please print with manual
feed tray if special printing medium
is used to print.
Take the excessive papers out from
paper tray; please print with manual
feed tray if special printing medium
is used to print.
Clean the paper path.
Clean the feed roller.
Separate the print media to
eliminate some static electricity.
It is suggested that you use the
recommended print media.
Separate the print media or use
better quality and dry print media.
Solution
• Please use proper print media
with in the specification range.
• Set the resolution and concentration
setting of program, or cancel ticking
the save toner mode.
• It is suggested to replace the original
toner cartridge.
• It is suggested to replace the original
toner cartridge.
• Please use the print media within the
specification range.
• Clean the paper path.
77