Step 6: Connecting The Power Cord; Additional: Connecting Additional Equipment12 - Philips MCD708/79 User Manual

Connections
Step 6: Connecting the power
cord
After everything is conec ted properly,
plug in the AC power cord to the power
outlet.
Never make or change any connection with the
power switched on.
Additional: Connecting
additional equipment
IMPORTANT!
– Some discs are copy-protected. You
cannot record the disc through a VCR or
digital recording device.
– When making connections, make sure
the colour of cables matches the colour
of jacks.
– Always refer to the owner's manual of
the other equipment for complete
connection and usage details.
C
SUB WOOFER
D
AUDIO
INPUT
12
VIDEO IN
AUDIO IN
L
VCR
B
R
LINE OUT
A
AUDIO OUT
L
R
Television
Viewing and listening to the playback of
other equipment A
●
Connect the system's AUX IN (R/L)
jacks to the AUDIO OUT jacks on the
other audio/visual device (such as a TV,
VCR, Laser Disc player or cassette deck).
Before starting operation, press SOURCE on
the front panel to select AUX or press AUX on
the remote in order to activate the input source.
Using the VCR for recording DVDs B
●
Connect one of the system's VIDEO jacks
to the corresponding VIDEO IN jack and
LINE OUT (R/L) jacks to the AUDIO IN
jacks on the VCR. This will allow you to
make analogue stereo (two channel, right
and left) recordings.
Recording (digital) C
●
Connect the system's COAXIAL or
OPTICAL jack to the DIGITAL IN jack
on a digital recording device (such as DTS-
Digital Theatre compatible, with Dolby
Digital decoder).
Before starting operation, set the DIGITAL
OUT according to the audio connection.
(See "DIGITAL OUT".)
Connecting an active subwoofer D
●
Connect the DVD micro system's
SUBWOOFER jack to the AUDIO
INPUT jack on an active subwoofer (not
supplied).