Step 4 : Connecting The Fm/Mw Antennas; Basic Connections; Step 5: Connecting The Power Cord - Philips HTS6500/93 User Manual

fi x the claw
into the slot
MW
1
antenna
~
MAINS
L
R
Step 4: Connecting the FM/
MW antennas
A
Connect the supplied MW loop antenna
to the MW jack. Place the MW loop
antenna on a shelf, or attach it to a stand
or wall.
B
Connect the supplied FM antenna to the
FM jack. Extend the FM antenna and fi x
its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.

Basic Connections

FM antenna
2
FM/MW ANTENNA
MW
FM 75
SUB- FRONT FRONT
WOOFER RIGHT LEFT
L
R
HDMI OUT
Step 5: Connecting the
power cord
After everything is connected
properly, plug the AC power cord
into the power outlet.
The Eco Power LED on the DVD system
will light up. Never make or change any
connections with the power turned on.
Helpful Hint:
– Refer to the type plate at the rear or
bottom of the product for identifi cation and
supply ratings.
(continued)
FM/MW ANTENNA
~
MAINS
MW
FM 75
17