Connections; Step 1: Placing Speakers - Philips MCD708/79 User Manual

Connections

Speaker
(right)
IMPORTANT!
– The type plate is located at the
bottom of the system.
– The voltage selector located at the
bottom of this system is preset at
220V-240V from the factory. For
countries that operate at 110V-127V,
please adjust to 110V-127V before you
switch on the system.
– Before connecting the AC power cord
to the wall outlet, ensure that all
other connections have been made.
– Never make or change any
connections with the power switched on.
8
MW antenna
FM antenna
OOFER
LINE OUT
SUB WOOFER

Step 1: Placing speakers

speaker
Place the front left and right speakers at equal
distances from the TV set and at an angle of
approximately 45 degrees from the listening
position.
Notes:
-To avoid magnetic interference, do not
position the front speakers too close to your
TV set.
-Allow adequate ventilation around the DVD
System.
AC power
Speaker
(left)
Front
( left )
VIEWING AREA
Front
speaker
( right )