CLIP/UNCLIP YOUR SIDE PANELS
1
2
1
3
Unplug the machine and remove
the water tank and maintenance
unit.
5
1
2
Clip the new side panel as shown
in the picture.
Ensure the panel is properly
secured.
NOTE: the machine side panels has been designed to be easily clipped and unclipped without a specific tool.
These panels are designed for the Nespresso Pixie Clips machine.
2
Take the Pixie Clips machine as
shown in the picture.
6
Come and discover a wide range
of side panels to syle your machine
in your Nespresso Boutiques or
online at nespresso.com
3
Push with the thumb and pull
with the other hand to unclip
your side panel as shown in the
picture.
NOTE: an additional set of
panels is offered with your machine.
CAUTION: do not change the panels when the machine is hot
(wait 10 minutes after the last brewing).
4
Position the new side panel, arrows
pointing up.
EN
7