Clock/Timer; Clock Setting; Timer Setting; Activating And Deactivating Timer - Philips MCD510/21 User Manual

Clock/Timer

ECO POWER
STANDBY - ON
iR
ALBUM / PRESET
TIMER SET
SOURCE

Clock setting

See page 21.

Timer setting

●
The system can be used as an alarm clock,
whereby the DISC, TUNER or TAPE is switched
on at a set time (one time operation). The clock
time needs to be set first before the timer can be
used.
1
In standby mode, press and hold TIMER SET3
(TIMER on the remote) for more than two
seconds.
➜ "SELECT SOURCE" scrolls followed by the
last selected source.
2
Press SOURCE to select your desired source
and press TIMER SET3 (TIMER on the
remote) to confirm.
➜ "SET ON TIME" scrolls followed by "ON 0 :
00".
3
Press TUNING S/T to set the hours
and press TIMER SET to confirm.
4
Press TUNING S/T to set the minutes
and press TIMER SET to complete the setting.
➜
The timer is now set and activated.
36
RECORD
T H E A T H R E
M C D 5 1 0 M I C R O
TUNING
PROGRAM DSC DBB
INCREDIBLE
SURROUND
BAND
DISPLAY CLOCK SET
VOLUME

Activating and deactivating timer

●
In standby or during playback, press TIMER
SET3 (TIMER on the remote) once.
➜
Display shows
if deactivated.

Sleep timer setting

The sleep timer enables the system to switch off
by itself after a set period of time.
1
Press SLEEP on the remote control repeatedly
to select a preset time.
➜
The selections are as follows (time in
minutes):
90 ™ 80 ™ 70 ™ 60 ™ 50 ™ 40 ™ 30 ™
20 ™ 10 ™ OFF
➜ "SLEEP XX" or "OFF" is displayed. "XX" is the
time in minutes.
2
When you reach the desired length of time, stop
pressing the SLEEP button.
To deactivate the sleep timer
●
Press SLEEP repeatedly until "OFF" is displayed,
or press ECO POWER/STANDBY-ON y.
/PROG /PROG
IS DSC
if activated, and disappears