8.2.2 Replacement of the Power Amplifier IC
TOP PREVIOUS NEXT
Step 1
Follow the procedures in 'Checking Procedure for each major P.C.B.' (
Step 2
Remove the wires at CN302, CN303 and CN304 and pull out the Main PCB.
Step 3
Remove the 4 screws fixed to the Power Amplifier IC.
Step 4
Unsolder the terminals of Power Amp IC and replace the respective component.
file:///D|/Documentos/Manolo/Service/Panasonic/Manuales/Audio/SA-AK500P_SA-AK500PC/SVC/s0802020000.html[17/03/2009 01:02:19 p.m.]
Step 1 - Step 4
).