Panasonic SA-AK500PC Service Manual page 97

Note:
Insert a short pin into the flexible cable for traverse unit.
Installation of the CD servo P.C.B. after replacement
Step 1 Connect the FFC board.
Step 2 Install the CD servo P.C.B. in the traverse deck assembly.
Note:
Before installing the CD servo P.C.B., move the optical pickup towards the outer edge from the marking (black
triangle).
[Otherwise, the reset detect switch (S701) mounted on the CD servo P.C.B. may be damaged.]
TOP PREVIOUS NEXT
file:///D|/Documentos/Manolo/Service/Panasonic/Manuales/Audio/SA-AK500P_SA-AK500PC/SVC/s0802010000.html[17/03/2009 01:02:19 p.m.]