Panasonic SA-AK500PC Service Manual page 126

12.2.1 AM-IF Alignment
TOP PREVIOUS NEXT
AM-IF ALIGNMENT
SIGNAL GENERATOR OR SWEEP GENERATOR
CONNECTIONS
Fashion a loop of several turns of
wire and radiate signal into loop of
receiver.
AM-RF ALIGNMENT
SIGNAL GENERATOR OR SWEEP GENERATOR
CONNECTIONS
Fashion a loop of several turns of wire
and radiate signal into loop of receiver.
Fashion a loop of several turns of wire
and radiate signal into loop of receiver.
TOP PREVIOUS NEXT
file:///D|/Documentos/Manolo/Service/Panasonic/Manuales/Audio/SA-AK500P_SA-AK500PC/SVC/s1202010000.html[17/03/2009 01:02:22 p.m.]
RADIO DIAL
SETTING
FREQUENCY
450 kHz 30% Point of non-
Mod. at interference (on/about
400Hz. 600 kHz)
RADIO DIAL
SETTING
FREQUENCY
520 kHz Tuning Headphone Jack (32Ω) Fabricate the plug as shown in Fig. 2 and
capacitor fully then connect the lead wires of the plug to the measuring
closed. instrument.
600 kHz Tuning Headphone Jack (32Ω) Fabricate the plug as shown in Fig. 2 and
capacitor fully then connect the lead wires of the plug to the measuring
open. instrument.
INDICATOR (ELECTRONIC VOLTMETER OSCILLOSCOPE)
Headphone Jack (32Ω) Fabricate the plug as shown in Fig. 2
and then connect the lead wires of the plug to the measuring
instrument.
INDICATOR (ELECTRONIC VOLTMETER OSCILLOSCOPE)
ADJUSTMENT(Shown REMARKS
in Fig.3)
Z102 (AM IFT) Adjust for
maximum
output.
ADJUSTMENT(Shown REMARKS
in Fig.1)
Z101 (AM OSC Coil) Adjust for
maximum
output.
Z101 (AM ANT Coil) Adjust for
maximum
output.