En Original Instructions - Metabo SRE 4350 TurboTec Original Instructions Manual

Original instructions
1. Declaration of Conformity
We declare under our sole responsibility: These
sanders, identified by type and serial number *1),
comply with all relevant requirements of the directives
*2) and standards *3). Technical file at *4) - see page
3.
2. Specified Use
The machine is suitable for dry sanding of flat and
elliptical surfaces, wood, plastics, non-ferrous
metals, sheet metal and similar filled and painted
surfaces.
The user bears sole responsibility for any damage
caused by improper use.
Generally accepted accident prevention regulations
and the enclosed safety information must be
observed.
3. General Safety Instructions
For your own protection and for the protec-
tion of your power tool, pay attention to all
parts of the text that are marked with this
symbol!
WARNING – Reading the operating instruc-
tions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety warn-
ings and instructions may result in electric shock, fire
and/or serious injury.
Keep all safety instructions and information for
future reference.
Pass on your electrical tool only together with these
documents.
4. Special Safety Instructions
Dust from material such as paint containing lead,
some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may
cause allergic reactions and/or respiratory diseases
to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic
such as oak and beech dust especially in conjunction
with additives for wood conditioning (chromate, wood
preservative). Material containing asbestos must
only be treated by specialists.
- Use a dust extractor or the dust collection box
where possible.
- To achieve a high level of dust collection, use a suit-
able Metabo vacuum cleaner together with this tool.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is recom-
mended.
Follow national requirements for the materials you
want to work with.
Pull the plug out of the plug socket before any adjust-
ments or servicing are performed.
Wear ear protectors when working for long periods of
time. High noise levels over a prolonged period of
time may affect your hearing.
Materials that generate dusts or vapours that may be
harmful to health (e.g. asbestos) must not be
processed.
Secure the workpiece against slipping, e.g. with the
help of clamping devices.
5. Overview
See page 2.
1 Additional handle (removable)
2 Setting wheel for selecting oscillating frequency
3 TurboBoost switch
4 Lock button for continuous activation
5 Trigger
6 Dust collection box
7 Cleaning flap
8 Fluted filter
9 Sanding disc *
10 2 clamping elements
11 Sanding plate
12 Extractor connection piece
* depending on equipment/not in scope of delivery
6. Initial Operation
Before plugging in the device, check to see that
the rated mains voltage and mains frequency,
as specified on the rating label, match your power
supply.
6.1 Additional handle (removable)
If necessary, you can unscrew the additional handle
(1) (right-hand thread).
6.2 Installation of sanding disc
Sanding sheet with velcro-type fastening
Simple attachment and removal thanks to the velcro-
type fastening. Simply press on the sanding disc
such that the holes in the sanding disc (9) and
sanding plate (11) are aligned.
Sanding sheet without velcro-type fastening
Secure the sanding disc using a clamping element
(10). Pull the disc across the sanding plate (11) so it
is taut; then fasten in place with the other clamping
element
7. Use
7.1 On/Off switch, continuous activation
To start the machine, press the trigger (5).
For continuous operation the trigger can be locked
with the lock button (4). To stop the machine, press
the trigger (5) again.
7.2 Setting oscillating frequency
When the TurboBoost switch (3) is switched off, the
oscillating speed can be set at the setting wheel (2).
This is also possible during operation.
ENGLISH en
7