En Original Instructions - Metabo DSE 280 Intec Original Instructions Manual

Original Instructions
1. Declaration of Conformity
We, being solely responsible, hereby declare that
these triangle cutters, identified by type and serial
number *1), meet all relevant requirements of
directives *2) and standards *3). Technical
documents for *4) - see page 3.
2. Specified Use
The triangular base plate sander is suited for dry
grinding of flat and curved surfaces, wood, plastics,
NF metals, sheet steel and similar, primed and
painted surfaces.
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
3. General Safety Instructions
For your own protection and for the
protection of your power tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Reading the operating
instructions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety
warnings and instructions may result in electric
shock, fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Pass on your power tool only together with these
documents.
4. Special Safety Instructions
Pull the plug out of the socket before making any
adjustments, changing tools, carrying out
maintenance or cleaning.
Secure the workpiece against slipping, e.g. with the
help of clamping devices.
Working with the scraping knife: Parts of the
workpiece may spilt off. Danger of injury from sharp
tool edges. Therefore you must wear goggles and
work gloves!
Do not use the triangle cutter for wet polishing!
Do not process surfaces that are impregnated with
liquids containing solvents!
Do not process wet coatings! The surface heats up
during processing and toxic vapours may develop.
Wear ear protectors when working for long
periods of time. High noise levels over a
prolonged period of time may affect your hearing.
Reducing dust exposure:
Some of the particles generated using this
power tool may contain substances known to
cause cancer, allergic reactions, respiratory
diseases, birth defects or other reproductive harm.
Some of these substances include: lead (in paint
containing lead), mineral dust (from bricks,
concrete etc.), additives used for wood treatment
(chromate, wood preservatives), some wood types
(such as oak or beech dust), metals, asbestos.
The risk from exposure to such substances will
depend on how long the user or nearby persons are
being exposed.
Do not let particles enter the body.
To reduce exposure to these substances: work in a
well ventilated area and wear protective equipment,
such as dust masks that are specially designed to
filter out microscopic particles.
Observe the relevant guidelines for your material,
staff, application and place of application (e.g.
occupational health and safety regulations,
disposal).
Collect the particles generated at the source, avoid
deposits in the surrounding area.
Use only suitable accessories. In this way, fewer
particles enter the environment in an uncontrolled
manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:
- do not direct the escaping particles and the
exhaust air stream at yourself or nearby persons
or on dust deposits.
- Use an extraction unit and/or air purifiers.
- Ensure good ventilation of the workplace and
keep it clean using a vacuum cleaner. Sweeping
or blowing stirs up dust.
- Vacuum or wash protective clothing. Do not blow,
beat or brush.
5. Overview
See page 2.
1 Slide switch (0/I)
2 Adjusting wheel (setting the oscillating
frequency)
3 Extractor connection piece *
4 Hexagon socket screw *
5 Plugs *
6 Hexagon spanner
7 Cover *
8 Dust filter (unbleached) *
9 Dust cassette *
10 Grinding plate (perforated, with hook and loop
backing)
11 Spring
12 Hexagon socket screw
13 Perforated adhesive sanding sheet *
14 Ribbed sanding plate *
15 Suction channels
16 Wire
*depending on equipment/not in scope of delivery 17 Block
ENGLISH en
9