Acer M11E User Manual page 61

IDE Primary Channel Slave
This parameter lets you configure the hard disk drive connected to the
slave port of IDE channel 1.
IDE Secondary Channel Master
This parameter lets you configure the hard disk drive connected to the
master port of IDE channel 2.
IDE Secondary Channel Slave
This parameter lets you configure the hard disk drive connected to the
slave port of IDE channel 2.
The following screen appears if you select any of the IDE Drive
parameters:
IDE Primary/Secondary
Type ........................ [ Auto ]
Cylinder .................. [ XXXX ]
Head ...................... [ XXXX ]
Sector .................... [ XXXX ]
Size ...................... [ XXXX ] MB
Hard Disk Size > 504MB ...... [ Auto ]
*Hard Disk Block Mode ........ [ Auto ]
*Advanced PIO Mode ........... [ Auto ]
*Hard Disk 32-bit Access ..... [Enabled ]
*DMA Transfer Mode ........... [Auto]
*CD-ROM Drive DMA Mode ....... [Disabled]
Setup Utility
Channel Master/Slave
2-13