Playing Macros - Bosch amax 2100 Operation Manual

34 en | Macros
4.
5.
6.
7.
P
9.2

Playing macros

How to play a macro
There are two methods to play a macro.
Method 1:
4
P
Method 2 (Quick Play):
4
P
To enable/disable this function contact your installer.
Notice!
Please note that the play function has to be enabled/disabled
individually for every user. Please refer to Add/change user
codes, page 36.
2017.04 | 07 | F.01U.295.569
Enter your code + [3] [1] + [#] for bypassing zones (see
also Bypassing/unbypassing zones, page 29).
The STAY indicator flashes fast. The available zones are
shown. Unavailable zones are marked with an x.
Select zone 3 an press [*].
Zone 3 is checked.
Press [#] to confirm and to exit the bypass menu.
Press [#] for three seconds to end the recording of the
macro and to save it.
The system beeps twice. The macro 1 for bypassing zone 3
is recorded. Zone 3 is bypassed.
Enter your code and press the number on which the macro
is assigned for three seconds. (Possible numbers are 1, 2
and 3.)
The system beeps and the operation which is assigned to
the macro is executed automatically.
Press the number on which the macro is assigned for three
seconds. (Possible numbers are 1, 2 and 3.)
The system beeps and the operation which is assigned to
the macro is executed automatically.
Bosch Sicherheitssysteme GmbH
AMAX panel