Assembly; Operations - Bissell SPOTCLEAN CORDLESS 1923 SERIES User Manual

Assembly

Assembling your portable machine is a
simple process.
1. Slide the flex hose clip into the opening on
the front of the machine. You will hear a "snap"
when it is locked into place.
2. Snap the hose grip bracket into the back of
the machine on the clean tank side. Wrap the
flex hose around the unit and snap hose grip
into bracket.
3. Snap the second tool storage into the back
of the machine.
Charging Battery
Before charging, make sure unit is turned OFF.
1. Insert the charging adapter plug into the
charging port on the back of the unit.
2. Plug the adapter into the wall outlet. The
battery icon will illuminate red when charging.
Charge the unit completely for 4 hours prior
to first use.
NOTE: The adapter may become warm
during charging - this is normal.
3. When the unit is fully discharged,
approximately 4 hours of charging is required
for the battery to regain full capacity.
NOTE: Make sure your unit is fully charged
before using it. To check the battery status,
turn the machine on by pressing the power
button located on the handle. Battery is
fully charged when all three of the blue
status lights are illuminated.

Operations

Getting ready
1. To fill the clean water/solution tank
a. Remove the tank by lifting it straight up
and away from the unit.
b. Pull on the black tab to reveal tank opening.
The plug rotates out of the way for easy filling.
DO NOT BOIL OR MICROWAVE WATER.
c. FOR LARGE MESS: Follow the fill lines
on your clean tank to add the correct
amount of hand hot tap water (140°F/60°C
MAX), portable machine formula, and 1oz of
BISSELL Oxygen Boost.
FOR SMALL MESS: Follow the fill lines on
your clean tank to add the correct amount
of hand hot tap water (140°F / 60°C MAX),
and portable machine formula.
d. Replace the plug by rotating into place
and pressing gently onto tank.
Do not plug in your carpet cleaner until
you are familiar with all instructions and
operating procedures.
1.
1.
The battery icon will illuminate red when charging.
Charging
Battery Status Status Light
100% Blue
99% to 66% Blue
65% to 33% Blue
32% to 10% Blue
9% to 1% Red
0% Red
1a.
WARNING
2.
Light Behavior
3 Lights On for
10 Minutes. Then Blinks
1 Time Per Minute
2 Lights On, 1 Light
Blinking
1 Light On, 1 Light Blinking
1 Light Blinking
1 Light Blinking
1 Light Blinking
1b.
www.BISSELL.com
2.
3.
5