Table of Contents
Advertisement
Optional: Connecting to an
Audio System
STEREO
VIDEO OUT
Y
Pb
S-VIDEO OUT
Pr
COAXIAL
COMPONENT
DIGITAL OUT
VIDEO OUT
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
1
Select one of the video connections
(VIDEO IN, S-VIDEO IN or Component
Video (Y Pb Pr) jack depending on the
options available on your TV.
2
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
01-34 DVP533K_78
OPTICAL
AUDIO
IN
DIGITAL
L
R
AUDIO OUT
11
Connections
Optional: Connecting Digital AV
Receiver
AV Receiver
VIDEO OUT
Pb
MAINS
S-VIDEO OUT
Pr
COAXIAL
COMPONENT
DIGITAL OUT
VIDEO OUT
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1
Select one of the video connections
VIDEO IN, S-VIDEO IN or Component
Video (Y Pb Pr) jack depending on the
options available on your TV.
2
Connect the COAXIAL jack of the DVD
Player to the corresponding Digital Audio
In jack on your Receiver (cable not
supplied).
3
Set the DVD Player's Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver (see page 25
"Digital Output").
Helpful Hint:
–
If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
19/03/2004, 2:55 PM
AUDIO
IN
COAXIAL
Y
L
R
AUDIO OUT
11
8239 300 32131
Advertisement
Table of Contents
