Optional: Connecting To An Audio System; Stereo System Has Dolby Pro Logic Or Right / Left Audio In Jack; Optional: Connecting Digital Av Receiver; Receiver Has A Pcm, Dolby Digital, Or Mpeg2 Decoder - Philips DVP720SA/75 User Manual

Optional: Connecting to an
Audio System
STEREO
Y
L
R
Pb
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
1
Select one of the video connections
(CVBS VIDEO IN, S-VIDEO IN, SCART,
COMPONENT VIDEO IN) depending on
the options available on your TV.
2
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
01-38 DVP720_752
OPTICAL
AUDIO
IN
DIGITAL
CENTRE
L L
R R
SUB-
STEREO
FRONT REAR
WOOFER
1
2
3
9
Connections
Optional: Connecting Digital AV
Receiver
OPTICAL
AUDIO
IN
DIGITAL
OR
Y
CVBS
DIGITAL AUDIO OUT
PCM/MPEG2/Dolby Digital
COAXIAL OPTICAL
Pr Pb
S-VIDEO
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
Select one of the video connections
(CVBS VIDEO IN, S-VIDEO IN, SCART,
COMPONENT VIDEO IN) depending on
the options available on your TV.
Connect the COAXIAL or OPTICAL jack
of the DVD Player to the corresponding
Digital Audio In jack on your Receiver
(cable not supplied).
Set the DVD Player's Analog Output to
'Stereo' which delivers sound from only
the two front speakers and subwoofer.
(see page 25 "Setting the analogue output").
Helpful Hints:
– Some DVDs are copy protected. You
connot record the disc through a VCR or
digital recording device.
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
3/08/2004, 4:51 PM
AV Receiver
9
3139 246 13512