Side Panel Connectors - Multitech MultiConnect rCell 100 User Manual

Side Panel Connectors

The device has connectors on both sides of the housing. The right side of the device contains a SIM card holder, a
reset button, a GPS antenna connector, and a cellular-auxiliary antenna connector pair. Depending on the model of
your device, the GPS and WiFi antenna connector may or may not appear.
The following shows the right side panel of the device:
The following shows the left side panel of the device containing an RS-232 connector, an Ethernet connector, and
the power receptacle.
The following table describes the items on the two side panels:
Label
CELL, AUX
GPS
WiFi
SIM
RESET
RS-232
E-NET
®
MultiConnect rCell 100 MTR-H5 User Guide
Description
Cellular antenna inputs. Use with the Laird HEPTA-SM MAF94300 antenna supplied with the
device if ordered as a bundle.
■ CELL - Primary. AUX - Diversity.
GPS antenna input. Use with the Trimble GPS antenna 66800-52 supplied with the device
when ordered as a bundle.
Used only on the B08 and B10 models.
Wi-Fi antenna input. Use with the Taoglas Antenna Solutions GW.11.A153 antenna supplied
with the device if ordered as a bundle.
Receptacle for a SIM card (Subscriber Identity Module).
Resets the device. Refer to Resetting the Device or Resetting User Defined Settings to the
Device.
DE 9-pin, female-D Sub through-hole connector.
RJ-45 receptacle for standard Ethernet 10/100 Base-T.
Caution: Ethernet ports and command ports are not designed to be connected to a public
telecommunication network or used outside the building or campus.
CHAPTER 1 PRODUCT OVERVIEW
11