Philips DVP5120K/55 User Manual page 33

Rating Menu
Parental Control
Set Password
dvp5120k_55_eng1.indd 33
Setup Menu Options
(underlined options are the factory default settings)
This setting allows you to control the playback of certain disc
through a rating level. It works only on the DVDs with parental
level assigned to the complete disc or to certain scenes on the
disc.
1) Use the numeric keypad 0-9 on the remote control to
enter your four-digit password and press OK.
) Use  keys to select a rating level from 1 to 8 and press
OK.
Notes:
– The ratings are country-dependent ('1' is considered material
that is least offensive and '8' is most offensive). To disable
parental controls and allow all discs to play, select '8'.
– Some DVDs are not encoded with a rating though the movie
rating may be printed on the disc cover. The rating level
feature does not prohibit playback of such discs. VCD, SVCD
and CD have no level indication, so parental control has no
effect on these type of discs.
– DVDs that are rated higher than the level you selected will
not be played unless you enter the same four-digit password.
The password is used for Parental Control. The default
password is '0000'.
To change the password:
1) Use  keys to select { Set Password } and press OK.
) Use the numeric keypad 0-9 on the remote control to
enter your existing four-digit password at { Password }.
Note: When doing this for the first time or if you forget your
existing password, enter '0000'.
) Press OK to proceed.
) Enter the new four-digit password at { New Password }.
5) Press OK to confirm and press SETUP to exit the menu.
(continued)

2008-04-21 10:23:20 AM