Table of Contents
Advertisement
Setup Menu Options
Audio Menu
Digital Output
Night Mode
Down Sampling
dvp5120k_55_eng1.indd 32
(continued)
(underlined options are the factory default settings)
This setting is only required if you have connected the audio
output of this unit to an amplifier/receiver using the digital
output jack.
{ Off }
{ PCM }
{ ALL }
This mode optimizes playback of sound at low volume. High
volume outputs will be softened and low volume outputs will be
enhanced to an audible level. This feature is only applicable for
DVD video discs with Dolby Digital mode.
{ Off }
{ On }
This feature enables you to disable digital signal processing for
better sound quality.
{ Off }
{ On }
–
Disable digital audio output. Select this if
you are using the analog audio jacks to
connect this unit to a TV or Stereo system.
–
The connected device does not support
multi-channel formats. All audio signals are
downmixed to PCM format (-channel).
–
The connected device supports multi-
channel audio formats. The digital audio
format will be output as on disc.
–
Turn off night mode. Select this to enjoy the
surround sound with its full dynamic range.
–
Turn on night mode.
–
Play disc recorded at sampling rate of 96
kHz. This rate can only be achieved in
Stereo-Classic (Flat) mode.
–
Play disc recorded at sampling rate of
8 kHz.
2008-04-21 10:23:12 AM
Advertisement
Table of Contents
