Getting Started; Setting Up Progressive Scan Feature - Philips DVP5120K/55 User Manual

Getting Started

Setting up Progressive Scan
feature
(for Progressive Scan TV only)
The progressive scan displays twice the
number of frames per second than
interlaced scanning (ordinary normal TV
system). With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
Before you start...
– Ensure that you have connected this
unit to a progressive scan TV (see
'Option : Using Component Video jacks
(Y Pb Pr)' ).
Turn on the TV to the correct viewing
A
channel for this unit.
Make sure that the TV progressive

scan mode is turned off (or set to
interlaced mode). Refer to your TV user
manual.
Turn on this unit and press SETUP on
B
the remote control.
Use  keys to select { Video } menu
C
and press .
Use  keys to select { Video Out }
D
> { P-Scan } in the menu and press OK
to confirm.
18
dvp5120k_55_eng1.indd 18
(continued)
Read the notification message on the TV
E
and confirm your action by selecting the {
Yes } in the menu and press OK.
There will be no picture on your TV
at this state until you have turned
on the progressive scan mode on
your TV.
Turn on your TV progressive scan mode,
F
refer to your TVs user manual.

Confirm your action by selecting the
G
{ Yes } in the menu and press OK.

can start to enjoy the high quality picture.
If no picture is displayed
Press ç to open the disc tray.
A
Press numeric keypad '1' on the
B
remote control.
Helpful Hints:
– If a blank/distorted screen appears, wait
for 15 seconds for the auto recovery.
– There are some progressive scan TV that
are not fully compatible with this unit,
resulting in an unnatural picture when
playing back a DVD VIDEO disc in the
progressive scan mode. In such a case, turn
off the progressive scan feature on this unit
and your TV.
A message appears on the TV.
The setup is now completed and you
2008-04-21 10:19:04 AM