Table of Contents
Advertisement
3 Connect
Make the following connections to use this product.
Basic connections:
•
Video
•
Audio
Optional connections:
•
Route audio to other devices:
•
Digital amplifier/receiver
•
Analog stereo system
•
USB flash drive
Note
•
Refer to the type plate at the back or bottom of the
product for identification and supply ratings.
•
Before you make or change any connections, ensure that
all the devices are disconnected from the power outlet.
Tip
•
Different types of connectors may be used to connect
this product to your TV, depending on availability and
your needs. A comprehensive interactive guide to
help you connect your product is available at www.
connectivityguide.philips.com.
Connect video cables
Connect this product to TV to view disc play. Select
the best video connection that TV can support.
Option 1: Connect to the HDMI jack (for a HDMI,
DVI or HDCP-compliant TV).
Option 2: Connect to the component video jacks
(for a standard TV or Progressive Scan TV).
Option 3: Connect to the AV out jack (for a
standard TV).
Note
•
You must connect this product directly to a TV.
Option 1: Connect to the HDMI jack
HDMI IN
1
Connect an HDMI cable (not supplied) to
•
the
HDMI OUT jack on this product.
•
the HDMI input jack on the TV.
Note
•
If the device supports HDMI CEC, you can control
compliant devices with a single remote control (see "Get
started" > "Use Philips EasyLink").
Tip
•
This type of connection provides best picture quality.
Option 2: Connect to the component
video jack
Pr
Pb
Y
COMPONENT
VIDEO IN
1
Connect the component video cables (not
supplied) to:
•
the
Y Pb Pr jacks on this product.
•
the COMPONENT VIDEO input jacks
on the TV.
Tip
•
The component video input jack on the TV might be
labeled as Y Pb/Cb Pr/Cr or YUV.
•
This type of connection provides good picture quality.
EN
7
Advertisement
Table of Contents
