Page 1
Register your product and get support at www.philips.com/welcome EN User manual DE Benutzerhandbuch ES Manual del usuario FR Mode d’emploi Manuale utente NL Gebruiksaanwijzing PT Manual do utilizador DVP4320...
Page 2
DO NOT STARE INTO BEAM. LOCATION: INSIDE, NEAR THE DECK MECHANISM. Italia DICHIARAZIONE DI CONFORMITA’ Si dichiara che l’apparecchio DVP4320, Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n.548. Fatto a Eindhoven Philips Consumer Lifestyles...
Connect USB flash drive Connect power Get started Prepare the remote control Find the correct viewing channel Select menu display language Turn on progressive scan Use Philips EasyLink Play Play a disc Play video Play music Play photo Play from USB flash drive...
1 Important Safety and important notice Warning • Risk of overheating! Never install the product in a confined space. Always leave a space of at least 4 inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product.
Implementers Forum, Inc. CLASS 1 LASER PRODUCT 2 Your product Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/ welcome. Feature highlights Philips EasyLink Your product supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol.
Remote control • Turn on this product or switch to standby mode. • Switch to the USB mode. c DISC MENU • Access or exit the disc menu. • Switch to the disc mode. • For VCD and SVCD, turn on or off PBC (playback control).
Note • If the device supports HDMI CEC, you can control compliant devices with a single remote control (see “Get started” > “Use Philips EasyLink”). • This type of connection provides best picture quality. Option 2: Connect to the component...
Option 3: Connect to the AV OUT jack Connect the supplied AV cables to: • AV OUT jack (3.5mm) on this product. • the video input jack on the TV. VIDEO IN • The video input jack on the TV may be labeled as A/V IN, VIDEO IN, COMPOSITE or BASEBAND.
Connect power Caution • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the unit. • Before connecting the AC power cord, ensure you have completed all other connections. Note •...
In this case, turn off the progressive scan feature on both this product and the TV. Use Philips EasyLink This product supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use one single remote control to control EasyLink-compliant devices that are connected through HDMI connectors.
Page 11
Button Action Start, pause or resume disc play. Stop disc play. Skip to a previous/next title or chapter. Search fast-backward or fast- forward. Press repeatedly to change the search speed. Search slow-forward or slow- backward. Press repeatedly to change the search speed. For VCD/SVCD, slow-backward search is not available.
Repeat play for a specific section During play, press REPEAT A-B at the start point. Press REPEAT A-B again to set the end point. » Repeat play starts. To cancel repeat play, press REPEAT A-B again. Note • The marked section for repeat play is only possible within a track/title.
Note • It may require longer time to display the disc content on the TV due to the large number of songs/photos compiled onto one disc/USB device. • If the JPEG photo is not recorded with an ‘exif ’ type file, the actual thumbnail picture cannot be shown on the screen.
• You can set or change the password, go to > [Password]. [OSD Language] Select an on-screen menu language. [Sleep Timer] Switch automatically to standby at the preset time. • [Off] - Disable sleep mode. • [15 mins], [30 mins], [45 mins], [60 mins] - Select the count down time for this product to switch to standby.
1. Press OK. 2. Press to set the volume. 3. Press OK to confirm and exit. [Sound Mode] Select a preset sound effect to enhance the audio output. • [3D] - Select a virtual surround sound effect that is produced from the left and right audio channels.
Play] [One Touch Standby] Note • Philips does not guarantee 100% interoperability with all HDMI CEC compliant devices. • You must turn on the HDMI CEC operations on the TV/ devices before you can enjoy the EasyLink controls. See the TVs/devices manual for details.
Page 17
[Version Info] Display the software version of this product. • This information is required when you want to find out if a newest software version is available at the Philips website that you may download and install on this product.
Page 18
[Password] settings. 7 Additional information Update software For software updates, check the current software version of this product to compare with the latest software (if available) at the Philips website. Caution • Power supply must not be interrupted during software upgrade.
Page 19
If you contact Philips, you will be asked for the model and serial number of your product. The model number and serial number are on the back of your product.
Page 20
• Turn on the audio device to its correct audio input source. No sound on HDMI connection. • You may not hear any sound from the HDMI output if the connected device is non-HDCP compliant or only DVI-compatible. • Ensure that the [HDMI Audio] setting is turned on.