3 Connect
Make the following basic connections to use the
DVD player.
Basic connections:
•
Video cables
•
Audio cables
Optional connections:
•
Audio to other devices:
•
Digital amplifier/receiver
•
Analog stereo system
Note
•
Refer to the type plate at the rear or bottom of the
product for identification and supply ratings.
•
Before you make or change any connections, ensure
that all the devices are disconnected from the power
outlet.
Tip
•
Different types of connectors may be used to
connect this product to your TV, depending on
availability and your needs. A comprehensive
interactive guide to help you connect your product is
available at www.connectivityguide.philips.com.
Connect video cables
Connect this DVD player to the TV to view
disc play.
Great user manuals database on
Select the best video connection that the TV can
support.
Option 1:
•
jacks (for a standard TV or Progressive Scan
TV).
•
Option 2:
(for a standard TV).
Note
•
You must connect this
TV.
Option 1: Connect to component
video jacks
Y
COMPONENT VIDEO OUT
1
Connect the component video cables (not
supplied) to the Y Pb Pr jacks on this DVD
player and the component video input
jacks on the TV.
•
If a progressive scan TV is used, you
may turn on the progressive scan mode
(see chapter 'Turn on Progressive Scan'
for details).
Tip
•
The component video input jacks on the TV may be
labeled as Y Pb/Cb Pr/Cr or YUV.
•
This type of connection provides good picture
quality.
UserManuals.info
Connect to component video
Connect to video (CVBS) jack
DVD player
directly to a
Pr
Pb
Y
Pr
COMPONENT
VIDEO IN
EN
9