Sony Ericsson FOMA SO905iCS Manual page 209

Composing and Sending
i-mode Mail
Sent mail is saved in [Outbox].
 Mail may not be displayed correctly on the
recipient's phone depending on the radio wave
condition.
1
From the Mail menu, select [Compose
message] and press
 You can also display the mail compose display
by pressing (Cmps msg) in the Mail menu.
Ｅｄｉｔ ｍａｉｌ
０
2
Enter an address at [
Enter an address within 50 half-width alphanumeric
characters and symbols.
3
Enter a subject at [
Enter a subject within 100 full-width or 200 half-
width characters.
4
Enter the main body at [
Enter the main body within 5,000 full-width or
10,000 half-width characters.
You can enter a Deco mail pict. to compose Deco-
mail (P.208).
To obtain the location information
From the Function menu, select [Rcv loc. info]
(P.277).
To display the preview image
From the Function menu, select [Preview].
5
Press (Send).
The mail is sent.
To save the main body of text as signature
From the Function menu, select [Save signature].
<Compose and send mail>
.
Number of entered bytes
].
].
].
● When you change the font size, from the
Function menu, from [Input method] → [Font
size], in the Edit mail or Edit address display,
the setting is only applied for the font size in the
matching word list. The setting for the font size
of an address, subject, and main body text is
changed from the next time when you compose
mail (P.127).
●
When the number of saved draft mail has
reached 50 or there is not enough memory left
for draft mail, you cannot compose new mail nor
edit draft mail.
● If new mail is sent when the number of saved
sent mail has reached 500 or there is not
enough free space, the unprotected sent mail is
overwritten from the oldest.
● If mail you send to several addresses is sent
successfully to some and unsuccessfully to other
addresses, the same mail is saved in [Outbox]
as sent mail and in [Draft] as unsent mail/mail
sent unsuccessfully.
● Even if the mail is sent successfully, you may
receive the error message "Transmission failed"
depending on the radio wave condition and the
mail is saved in [Draft].
● When 2in1 is set to the B mode, you cannot
compose any i-mode mail.
● You cannot send i-mode mail using Address B.
●
When you obtain location information and attach
the location information URL, "
front of the location information URL in the main
body. Attached location information URL is
counted as the characters in the mail main body.
● All the part of a title may not be received
depending on the recipient's terminal model.
Adding an Address
You can send i-mode mail containing the same
information up to five addresses all at once by
adding these addresses. You can select the
type of address from To, Cc, and Bcc.
1
Press (Func) in the Edit mail display.
The Function menu appears.
" appears in
207
Continued