Advertisement

Quick Links

Working Instruction, Mechanical
Applicable for S700i and S700c
1
2
3
3/00021-1/FEA 209 544/89 B
Company Internal
Sony Ericsson Mobile Communications AB
Disassembly .....................................................................................................................3
Reassembly ....................................................................................................................12
Replacement of Mechanical Parts ...............................................................................20
3.1
Case key rear ...................................................................................................20
3.2
Case key front..................................................................................................20
3.3
Case LCD front................................................................................................20
3.4
Case LCD rear .................................................................................................21
3.5
Hinge and Bush hinge .....................................................................................21
3.6
Harness (Main cables) .....................................................................................21
3.7
Battery cover assembly....................................................................................21
3.8
Panel key front.................................................................................................21
3.9
Panel LCD rear ................................................................................................21
3.10
Adhesives ........................................................................................................22
3.11
Cover RF .........................................................................................................22
3.12
Sheet absorption A ..........................................................................................23
3.13
Cover system connector I/O ............................................................................23
3.14
Cover MS ........................................................................................................24
3.15
Button lock switch assy ...................................................................................24
3.16
System Connector............................................................................................25
3.17
Cushion LCD hinge.........................................................................................26
3.18
LCD unit..........................................................................................................27
3.19
Cushion frame LCD ........................................................................................28
3.20
FPC hinge ........................................................................................................29
3.21
LCD flex sheet key..........................................................................................30
3.22
Frame LCD......................................................................................................30
3.23
Frame RF .........................................................................................................31
3.24
Vibrator ...........................................................................................................32
3.25
Key FPC ..........................................................................................................33
3.26
Frame BB ........................................................................................................34
3.27
Spring, A .........................................................................................................35
3.28
Key flex sheet key (Domes) ............................................................................36
3.29
Operator badge ................................................................................................36
3.30
Receiver...........................................................................................................37
3.31
Microphone......................................................................................................37
3.32
Buttons LCD (Top, Side, Base and Center) ....................................................38
3.33
Button shutter ..................................................................................................39
3.34
Light Guide (Charge LED)..............................................................................40
3.35
Liquid intrusion indicator ................................................................................40
3.36
Camera 1,3M CCD (MCX-CC5).....................................................................41
3.37
Magnet.............................................................................................................42
3.38
Panel IRDA .....................................................................................................42
3.39
Button key .......................................................................................................43
3.40
Panel camera....................................................................................................44
Working Instruction, Mechanical
Approved according to 000 21-LXE 107 42/1

Advertisement

Table of Contents
loading

Summary of Contents for Sony Ericsson S700i

  • Page 1: Table Of Contents

    Working Instruction, Mechanical Working Instruction, Mechanical Applicable for S700i and S700c Disassembly ........................3 Reassembly ........................12 Replacement of Mechanical Parts ................20 Case key rear ....................20 Case key front....................20 Case LCD front....................20 Case LCD rear ....................21 Hinge and Bush hinge ..................21 Harness (Main cables) ..................21 Battery cover assembly..................21...
  • Page 2 Frame camera cover ..................45 3.42 Cover camera R, Cover camera L ..............46 3.43 GSM Antenna....................46 3.44 BT Antenna .....................47 Label..........................48 Dummy Battery Cover ....................49 Revision History ......................51 3/00021-1/FEA 209 544/89 B 2(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 3: Disassembly

    • Slot screwdriver Equipment • ESD-gloves (cotton gloves) • ESD-wristband Instruction • Keep all contact surfaces clean of dirt and hand-grease Phone views Front view Back view 3/00021-1/FEA 209 544/89 B 3(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 4 Slide down the battery cover completely and remove it. Remove the battery from the phone with your fingers. Start like the picture show. NOTE! Open out the phone 180º 3/00021-1/FEA 209 544/89 B 4(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 5 Then gently move the tool along the gap both ways until the case key rear is loose on all sides (2). If necessary do the same thing on the other side. 3/00021-1/FEA 209 544/89 B 5(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 6 Open out the main PBA from the frame NOTE! VERY IMPORTANT! Remember how the two main cables (Harness) are assembled “with a twist/crossover” to the main PBA 3/00021-1/FEA 209 544/89 B 6(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 7 The cable should be pulled towards the end of the circuit board in which the system connector mounts. Remove both connectors. Case key rear and circuit board disassembled. 3/00021-1/FEA 209 544/89 B 7(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 8 LCD rear from the case LCD rear. Remove the two case LCD rear screws at the bottom of the phone. NOTE! Removed screws cannot be reused and must be scrapped. 3/00021-1/FEA 209 544/89 B 8(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 9 Remove the four hinge screws (1), then the two case LCD rear screws (2). NOTE! Keep track of the different sizes of the screws. Removed screws cannot be reused and must be scrapped. 3/00021-1/FEA 209 544/89 B 9(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 10 Be careful not to damage the case key front and the case LCD rear. Open the upper cabinet with caution. Remove the case LCD front from the case LCD rear (1). 3/00021-1/FEA 209 544/89 B 10(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 11 Sometimes it helps if you bend the frame a little side to side. Remove the the LCD unit (with the frame) from the case key front. Case LCD front and LCD unit disassembled. 3/00021-1/FEA 209 544/89 B 11(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 12: Reassembly

    • Front opening tool NTZ 112 302/2 • Dentist hook Equipment • ESD-gloves (cotton gloves) • ESD-wristband Instruction Keep all contact surfaces clean of dirt and hand-grease 3/00021-1/FEA 209 544/89 B 12(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 13 NOTE! Don’t forget the bush hinge (1) Gently fold each end of the cables until they can slide through the center hole of the hingemechanism. 3/00021-1/FEA 209 544/89 B 13(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 14 If necessary – clean the surface of the panel LCD rear cavity with Isopropyl alcohol. Assemble the panel LCD rear (comes with a new adhesive) with your fingers. Upper cabinet resassembled. 3/00021-1/FEA 209 544/89 B 14(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 15 (1). NOTE! Make sure that the keyboard (1), volume keys (2), kamera key (3) and the light guide (4) are assembled and in the right position. 3/00021-1/FEA 209 544/89 B 15(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 16 PBA towards the case key front. Then carefully fold the main PBA over towards the case key front and start to slide it into the system connector. 3/00021-1/FEA 209 544/89 B 16(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 17 Use 20 Ncm of torque for the case key rear screws. Assemble four new screws. Tighten the case key rear screws according to screw sequence shown in the picture. Turn the phone around. 3/00021-1/FEA 209 544/89 B 17(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 18 Assemble the panel key front (comes with a new adhesive) with your fingers. Place the battery like the picture show. Slide on the battery cover like the picture show. 3/00021-1/FEA 209 544/89 B 18(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 19 Working Instruction, Mechanical Step-by-Step Instructions Upper and lower cabinet unit reassembled. 3/00021-1/FEA 209 544/89 B 19(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 20: Replacement Of Mechanical Parts

    Replacement of case key front: Check Disassembly and Reassembly headings and draw attention to the Note comments. Case LCD front Replacement of the case LCD front: Check Disassembly and Reassembly headings and draw attention to the Note comments. 3/00021-1/FEA 209 544/89 B 20(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 21: Case Lcd Rear

    Note comment. Panel LCD rear Replacement of the panel LCD rear: Check Disassembly and Reassembly headings and draw attention to the Note comment. 3/00021-1/FEA 209 544/89 B 21(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 22: Adhesives

    3.11 Cover RF Step-by-Step Instructions Remove the external antenna plug with the dentist hook. Assemble a new external antenna plug with your fingers. 3/00021-1/FEA 209 544/89 B 22(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 23: Sheet Absorption A

    Assemble the phone as described in 2 Reassembly. 3.13 Cover system connector I/O Step-by-Step Instructions Remove the cover system connector I/O with your fingers. Assemble a new cover by hand. 3/00021-1/FEA 209 544/89 B 23(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 24: Cover Ms

    (2). Assemble a new button lock switch assy with your fingers and with the tweezers. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 24(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 25: System Connector

    Correctly mounted system connector. NOTE! Don’t forget to reassemble the cover system connector I/O (3.13). • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 25(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 26: Cushion Lcd Hinge

    2. The cushion LCD hinge should be aligned like the picture shows. Assemble a new cushion LCD hinge with your fingers or with the tweezers. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 26(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 27: Lcd Unit

    Assemble a new LCD unit in the reverse direction. NOTE! Don`t forget to remove the protection foil. Be careful not to scratch the glass. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 27(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 28: Cushion Frame Lcd

    Remove the old cushion frame LCD with a blunt pair of tweezers. Assemble a new one with with the tweezers. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 28(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 29: Fpc Hinge

    The picture shows the FPC hinge separated from the LCD unit frame. Assemble a new FPC hinge in the reverse direction. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 29(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 30: Lcd Flex Sheet Key

    Replace the old LCD frame with a new one. NOTE! Don’t forget to assemble a new Cushion frame LCD (3.19) and all the adhesives. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 30(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 31: Frame Rf

    Lift away the old RF frame and replace it with a new one. NOTE! If necessary, clean the surface with Isopropyl alcohol before you assemble new adhesives. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 31(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 32: Vibrator

    NOTE! Press the vibrator to the bottom of the cavity gently with a blunt pair of tweezers. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 32(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 33: Key Fpc

    The FPC key is held in place to the frame BB with three hooks (by the arrows) Gently remove the old FPC key with a blunt pair of tweezers and with your hands like the picture shows. 3/00021-1/FEA 209 544/89 B 33(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 34: Frame Bb

    (1). Just bend with your hand until the frame become loose. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 34(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 35: Spring, A

    Frame BB (3.26) first. Replace the old Spring, A with new ones, use a blunt pair of tweezers. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 35(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 36: Key Flex Sheet Key (Domes)

    Isopropyl alcohol. Gently remove the old brand badge with a dentist hook like the picture shows. Assemble a new brand badge with a blunt pair of tweezers. 3/00021-1/FEA 209 544/89 B 36(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 37: Receiver

    NOTE! Press the microphone to the bottom of the cavity. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 37(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 38: Buttons Lcd (Top, Side, Base And Center)

    Remove the old LCD top button with a blunt pair of tweezers. Assemble a new top button by hand or with the tweezers. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 38(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 39: Button Shutter

    Use the guide pin (1) when reassembling the button shutter. NOTE! Make sure that the button shutter is assembled in the right position. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 39(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 40: Light Guide (Charge Led)

    Isopropyl alcohol before you assemble the new indicator. Remove the old liquid intrusion indicator and replace it with a new one. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 40(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 41: Camera 1,3M Ccd (Mcx-Cc5)

    Assemble a new camera assembly, press it to the bottom of the FPC connector and close it with the flex film assembly tool. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 41(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 42: Magnet

    Remove the old IRDA panel with a blunt pair of tweezers. Assemble a new one with the tweezers. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 42(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 43: Button Key

    Assemble a new one by hand. NOTE! Check so the button key is correctly assembled. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 43(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 44: Panel Camera

    Notice the tap (1) on the camera panel that should be inserted into the case key rear. Assemble a new panel camera by hand. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 44(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 45: Frame Camera Cover

    Remove the old frame camera cover with a blunt pair of tweezers. Assemble a new one with the tweezers. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 45(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 46: Cover Camera R, Cover Camera L

    Remove the old GSM antenna with a screwdriver and with your fingers. Assemble a new antenna and screw. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 46(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 47: Bt Antenna

    Remove the old BT antenna with a dentist hook. Assemble a new antenna with a blunt pair of tweezers. • Assemble the phone as described in 2 Reassembly. 3/00021-1/FEA 209 544/89 B 47(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 48: Label

    6. Take the new label and place it onto the frame according to Fig 1. Make sure that the label is placed in the right position. Fig 1. 3/00021-1/FEA 209 544/89 B 48(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 49: Dummy Battery Cover

    Turn the battery cover around. Mark with some color were you gonna cut the opening. Cut the opening, for the dummy battery cables with the sissors (white lines). 3/00021-1/FEA 209 544/89 B 49(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 50 Bend as the picture shows, so that the edge doesn´t damage the dummy battery cables. Cut off the part like the picture shows. Dummy battery cover ready. Dummy battery cover in use. 3/00021-1/FEA 209 544/89 B 50(51)  Company Internal Sony Ericsson Mobile Communications AB...
  • Page 51: Revision History

    6 Revision History Rev. Date Changes / Comments 2004-09-13 First release 2004-10-13 Updated Harness cables mounting info (Page 16), Updated with instruction for dummy battery cover (chapter 5) 3/00021-1/FEA 209 544/89 B 51(51)  Company Internal Sony Ericsson Mobile Communications AB...

This manual is also suitable for:

S700c

Table of Contents