Changing The Camera Settings - Sony Ericsson FOMA SO905iCS Manual

● When there is not enough memory or the number of recorded time of saved movies exceeds
the maximum number, the message appears. Change the place to save the movie or delete
unnecessary movies. Even if recording is possible, the maximum recording time may not be
achieved.
● When you switch to movie recording from still image recording, the following items are reset.
Item
Switch camera
Zoom magnification
Shoot mode
Auto timer
Grid Line
Photometry
●
Noise in the form of a mosaic may appear in an image or the image or sound may be
interrupted while you are recording a movie. Note that this is not malfunction.
● The movie sound is recorded via the microphone of the FOMA terminal. If you operate the
keys or block the microphone during recording, the recording may be affected by the sound
of the keys and other noise.
● The motion of the recorded movie may be rough depending on the object you are shooting
and the recording conditions.

Changing the Camera Settings

Setting Whether to Add Location Information to an Image When Saving
You can add location information automatically to a recorded still image using the
GPS function.
 When an image recorded with the Auto attach loc. info of the Set attach loc. info set to [ON] is
posted on a blog, sent with mail, etc., the location information is at risk of being known by other
persons.
1
Press (Func) in the Camera mode display, select [
Ｓｈｏｏｔ Ａｄｊｕｓｔ
Ｓｅｔ ａｔｔａｃｈ ｌｏｃ． ｉｎｆｏ ＯＦＦ
Ａｕｔｏ Ｆｏｃｕｓ Ｍａｃｒｏ ＯＦＦ
Ｍｕｌｔｉ ｆｏｃｕｓ Ｍｕｌｔｉ ＡＦ
Ａｕｔｏ ｔｉｍｅｒ ＯＦＦ
Ｐｈｏｔｏ ｌｉｇｈｔ ＯＦＦ
Ｆｌａｓｈ ＯＦＦ
Ｇｒｉｄ Ｌｉｎｅ ＯＦＦ
2
Select [Shoot] → [Set attach loc. info] and press
Ｓｅｔ ａｔｔａｃｈ ｌｏｃ． ｉｎｆｏ
Ａｕｔｏ ａｔｔａｃｈ ｌｏｃ． ｉｎｆｏ
ＯＦＦ
Ａｔｔａｃｈ ｌｏｃ． ｉｎｆｏ ｍｅｔｈ．
Ｆｒｏｍ ａｃｔ． ｃａｍｅｒａ
Ｌｏｃａｔｉｏｎ ｉｎｆｏ
3
Select [ON]/[OFF] of whether to add location information automatically at
[Auto attach loc. info].
Default setting
Out camera
×1.0
Regular
OFF
OFF
Center
Ｓｅｔ
[Auto attach loc. info] : Select whether to add location information
[Attach loc. info meth.] : S e l e c t a n o b t a i n i n g m e t h o d o f l o c a t i o n
[Location info]
Item
Select scene
EV
Auto Focus
Photo light
White balance
Picture effect
.
automatically when saving an image.
information to be added automatically.
: Save location information to be added to an
image.
Default setting
AUTO
±0.0EV
Macro OFF
OFF
AUTO
OFF
], and press .
Continued
171