Hobie Cat® Europe
assembly Manual - Hobie Catsy
StEPPInG tHE MaSt
Illustration
www.hobiecat.com
CaUtIOn DanGER : alUMInIUM MaSt
StaY aWaY fROM ElECtRICal WIRES
COntaCt WItH ElECtRICal WIRES MaY bE fatal
Step
Description
Place the mast on the boat so that the base
is positioned near the front cross beam. Find
1
the two side stays (the wires that have the
plastic covering on them). Place the side
stays one on each side of the boat.
Find in the parts bag, 2 more stay adjusters.
Using the clevis pins and rings supplied at-
2
tach the stay adjusters onthe shroud anchor
plates on the outside of each hull, near the
center of the boat.
Also attach the shrouds to the stay adjusters
using a clevis pin and ring. As a first step it
3
is recommended to attach the shrouds in the
fourth hole from the top of the stay adjuster
on both sides.
19