Stepping The Mast - Hobie TIGER Assembly Manual

2. Then, with one person on the trampoline, the second person lifts the mast by
the top and moves down the mast until the person on the trampoline can take the
mast on their shoulder. Then this person pushes his feet against the rear cross-
bar and pushes the mast forward with the weight of his body.
Once the mast is secured, remove the pin from the base of the mast which can
now turn freely.Fix the cunningham blocks on each side of the base of the mast.
3.
The second person can now take the forestay, make sure it is not tangled and
pin it into one of the top holes of the stay adjuster or of the furler mounted
stay adjuster (for the option roller jib).
4.
Once the mast is secure remove the bolt from the base
of the mast and stow it in a
secure place. You will need the bolt later for safe lowe-
ring of the mast.
CAUTION - DANGER
ALUMINIUM MAST
STAY AWAY OF ELECTRICAL WIRES
1.
Place the mast foot on the mast base and
place the pin in it. This prevents the mast
from leaving its base when lifted. Check that
the wires are not tangled.

Stepping the mast

Now you can affix the cunningham blocks to
the brackets on each side of the mast.
For the st time you raise the mast,
it is recommended
you use  people for extra safety.