Settings For An External Device; Connection To An External Device - Philips DVDR3505/37 User Manual

SETTINGS FOR AN EXTERNAL DEVICE

Connection to an External Device

Connect the external device properly to the unit by using input jacks either E2 and E3 (Front) or E1 (Rear).
When connecting an external device of monaural output to this unit, use AUDIO L jack of E2 (Front).
When connecting a DV-camcorder, use DV-IN jack of E3 (Front) instead of S-VIDEO IN or VIDEO IN jack. (See page 47.)
Use S-video or the RCA audio/video cables for this connection.
S-VIDEO VIDEO AUDIO OUT
OUT OUT
R
S-video RCA
or
cable video
cable
E2
to E2 & E3 IN
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your
local store.
1
Press [SETUP].
E7C40UD.indd 45 E7C40UD.indd 45
or
DV-OUT
L
external device
(camcorder, VCR etc.)
RCA DV cable
audio (4-pin)
cable
E3
front of this unit
VIDEO
OUT
RCA
video
cable
or
to E1 IN
IN
VIDEO
IN
VIDEO
Y
OUT
L L
P B /C B
R R
IN OUT P /C COAXIAL
OUT R R
ANTENNA AV IN S-VIDEO COMPONENT AV OUT DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
VIDEO OUTPUT
2
Use [K / L] to select "Required
Settings", then press [OK].
3
Use [K / L] to select "Video Input",
then press [OK].
4
Use [K / L] to select desired external
input position, then press [OK].
Video Input
E1 (Rear)
E2 (Front)
5
Use [K / L] to select the input jack
type to connect, then press [OK].
If you want to use VIDEO IN jack, select "Video
In".
If you want to use S-VIDEO IN jack, select
"S-Video In".
Video Input - E2 (Front)
Video In
S-Video In
6
Press [SETUP] to exit.
AUDIO OUT S-VIDEO
OUT
R L
RCA S-video
audio cable
cable
or
IN
VIDEO
IN
VIDEO
Y
OUT
L L
P B /C B
R R
IN OUT P /C
R R
OUT
ANTENNA AV IN S-VIDEO COMPONENT AV OUT
VIDEO OUTPUT
E1
HDMI OUT
rear of this unit
Video In
Video In
EN EN 45 45
2007/01/15 11:19:49 2007/01/15 11:19:49