Philips DVDR3505 Quick Start Manual

Playab l e Discs
This unit is compatible to play back Playable discs
the following discs / files.
DVD-video
is a trademark of DVD
Format/Logo Licensing
Corporation.
DVD+RW
DVD+R
DVD+R Double Layer
DVD-RW
(Finalized video mode discs only)
DVD-R
(Finalized video mode discs only)
Region Codes
The number inside the globe refers to region of the world.
This unit can play back DVDs that are labeled for ALL regions or for region 1.
Reco rd ab le Disc s
This unit can record to DVD+RW, DVD+R, DVD-RW and DVD-R. DVD+R/DVD-R can only
be recorded to once. DVD+RW/DVD-RW can be recorded to and erased many times.
• Following discs are recommended for good recording quality and are proven to be
compatible with this unit. However, depending on the media condition the unit may
not read the disc properly.
Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x,
JVC DVD-RW 4x,
Maxell DVD+R 4x/8x/16x, DVD-R 8x/16x,
SONY DVD+R 4x/8x/16x, DVD+RW 4x,
TDK DVD+R 4x/8x/16x
Performance of any other discs are not guaranteed.
• You can play back DVD+RW on most DVD players without finalizing. However, if
you have added or deleted chapters, or made chapters hidden, you must perform "Make Edits Compatible" before being able to
see those effects on other units (see page 83 in the user manual). To play back discs other than DVD+RW on other DVD players,
you will need to finalize.
Unrecordable Discs
• DVD-RW recorded in the mode other than +VR is not recordable on this unit unless you erase all contents in the disc (see page 82 in the
user manual).
• DVD-R recorded in the mode other than +VR is not recordable on this unit.
E7H40UD_EN_QG_v2.indd 1 E7H40UD_EN_QG_v2.indd 1
DIGITAL VIDEO DISC RECORDER WITH DIGITAL TUNER
DVDR3505/37
Logos Playable discs
CD-DA (audio CD)
video CD
CD-RW
CD-R
Playable files
CD-DA
MP3
Windows Media™ Audio
JPEG
DivX®
Logo
DVD+RW DVD+R 8cm/12cm, single-sided, single layer disc
Approx. max. recording time (SLP mode):
360 minutes (4.7GB) (for 12cm)
108 minutes (1.4GB) (for 8cm)
DVD-RW DVD-R
1
Ba si c Co nne ct io n
1) Disconnect the power cord of your TV from the AC outlet.
2) Disconnect RF coaxial cable from antenna input jack of your TV.
3) Make the connection as illustrated below.
VHF / UHF
antenna
or
cable TV
company
This connection is
Logos
for TV loop
through only
4) Plug in the power cords of the devices to the AC outlet.
Connection Using RF Modulator
1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
VHF / UHF
antenna
or
cable TV
company
Media
CD-RW/-R
CD-RW/-R
DVD+RW/+R 3) Set your RF modulator's channel 3/4 switch to either 3 or 4.
DVD-RW/-R
4) Plug in the power cords of the devices to the AC outlet.
5) Turn on your TV and choose the same channel as you set the RF modulator's channel 3/4 switch to.
• RF modulator is not supplied with this unit. You need to purchase it at your local store.
Connection to a Cable / Satellite Box
1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
e.g.)
satellite
dish
or
RF coaxial cable
cable TV
Attributes company
ANT. IN
cable/satellite
3) Plug in the power cords of the devices to the AC outlet.
* Refer to the user manual for other connection methods.
Finding the Viewing Channel
1) Press [STANDBY-ON y] to turn on the unit.
2) Turn on your TV. If connected to your VCR, make sure it is switched off or in standby mode before proceeding.
3) Press "2" on the TV's remote control, then press channel down button repeatedly until you see the "Initial
Setup" menu. This is the correct viewing channel (external input channel) for the recorder. For some TVs,
there may be a button on the TV's remote control that accesses the external input channel. It may be labeled
"SOURCE", "AV", or "SELECT". In such case, press it repeatedly.
RF coaxial cable IN
VIDEO VIDEO Y
IN OUT
L P /C
B B
L HDMI OUT
R
IN R OUT
OUT P R /C R COAXIAL
COMPONENT
ANTENNA AV IN S-VIDEO AV OUT S-VIDEO DIGITAL AUDIO OUTPUT
VIDEO OUTPUT PCM / BITSTREAM
RF coaxial
cable
RCA audio RCA video
cable cable
ANT. IN
R L
AUDIO IN VIDEO IN
rear of your TV
rear of this unit
RF coaxial cable
IN
VIDEO VIDEO Y
IN OUT
L P /C
B B
L HDMI OUT
RF coaxial cable
R
IN R P /C OUT
OUT R R COAXIAL
rear of your
COMPONENT DIGITAL AUDIO OUTPUT
ANTENNA AV IN S-VIDEO AV OUT VIDEO OUTPUT S-VIDEO
PCM / BITSTREAM
RF modulator
RCA audio cable
(not supplied)
RCA video cable
ANT. IN
RF coaxial cable
3 4 R L
ANT. IN CHANNEL AUDIO IN VIDEO IN TO TV
Set channel 3 or 4
rear of your TV
This connection is for
TV loop through only
ANT. IN
IN
VIDEO VIDEO
IN OUT
IN L HDMI OUT
RF coaxial cable
R
OUT
OUT IN COAXIAL
ANTENNA AV IN S-VIDEO S-VIDEO DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
RF OUT
AUDIO OUT VIDEO S-VIDEO
R L OUT OUT
box OUT
ANTENNA
or
RCA video cable
RCA audio cable
Connections
rear of your TV
AUDIO IN
VIDEO IN R L
RCA RCA
video audio
cable cable
VIDEO VIDEO VIDEO VIDEO
Y
IN IN OUT OUT
L L
P B /C B
L L
R R
IN IN R R P /C OUT
R R
COMPONENT
AV IN AV IN S-VIDEO S-VIDEO AV OUT AV OUT S-VIDEO
VIDEO OUTPUT
S-video cable
Follow to the back side of this sheet.
2008/06/02 15:59:22 2008/06/02 15:59:22