Setting The Clock; Auto Clock Setting - Philips DVDR3505/37 User Manual

Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area,
follow "Auto Clock Setting" below. If not, follow "Manual Clock Setting" on page 28.

Auto Clock Setting

This unit can set the time and date automatically by
referring to a PBS station.
Make sure
• The antenna/cable TV connections are correct.
• Channels are set. (Refer to page 24.)
• If this unit is connected to a cable/satellite box,
select the local PBS station on them to set the clock
automatically.
Note
• The clock may set itself automatically after you
connect the antenna/cable signal to this unit and
plug in the power cord.
• Only the analog PBS channel signal is effective for
auto clock setting.
• The unit receives the clock data at 12:00 a.m. / p.m.
from the PBS channel when the power is off.
E7C40UD.indd 27 E7C40UD.indd 27

SETTING THE CLOCK

1
Press [SETUP].
2
Use [K / L] to select "Clock", then
press [OK].
"Clock" menu will appear.
3
Use [K / L] to select "Auto Clock
Setting", then press [OK].
4
Use [K / L] to select "Auto", then
press [OK].
Auto Clock Setting
OFF
Auto
Manual
5
Press [SETUP] to exit.
6
Press [STANDBY-ON y y ] to turn off
the unit.
This unit will search for the time only when the
power is off. Leave it off for several minutes to
give this unit time to set the clock.
If the unit chooses an incorrect PBS channel, set the PBS
channel manually by following the steps below.
1
Select "Manual" at step 4, then press
[OK].
2
Use [the Number buttons] or [K / L]
to enter your PBS channel number,
then press [OK].
Auto Clock Setting - Manual
Set Channel No.
CH 1
3
Press [SETUP] and turn off the unit.
EN EN 27 27
2007/01/15 11:19:40 2007/01/15 11:19:40