Maintenance - Vax VCW-04 Instruction Manual

VCW-04 Commercial Cleaner User Guide v5.qxd:UG
vaxcommercial.co.uk

6. Maintenance

Removable brushes
Your carpet cleaner is equipped with removable brushes
for easy cleaning.
To remove brushes
Disconnect cleaner from electrical outlet.
To prevent possible leaking, remove clean solution tank
and recovery tank. Set tanks aside.
Press handle release pedal to lower handle. Turn cleaner
over so bottom is facing up (Fig 6/1)
Fig 6/1
Grasp inner portion of brush and pull brush assembly out
slightly to reveal latches (Fig 6/2).
Inner portion
of brush
Latches
Fig 6/2
Press all four latches and pull brush block out. The
brushes can be cleaned under running water (Fig 6/3).
Latches
Fig 6/3
16
maintenance
27/1/09 16:52 Page 16
To replace brushes
Align posts on both ends of brush assembly with slots (D)
in cleaner housing.
Make sure that square post also aligns with square hole.
Turn brushes slightly until post fits easily into hole (Fig
6/4).
Post
Square post
Post
Fig 6/4
Press brush assembly firmly to snap into place (Fig 6/5).
Fig 6/5
Slot
Square hole
Slot