Table of Contents
Advertisement
4.6
DOP Test Mode
Press and hold [2] key and [4] key and reset.
4.6.1 Default status immediately after the mode activation
It shall be same as normal activation.
4.6.2 Mode structure
DOP Test Mode is enabled regardless of current source.
4.6.3 Mode content
Syscon shall display the following information after entering this mode. The operation shown below shall be workable.
Display content
D
O
P
T
E
S
T
4.6.4 Mode operation specification
Operation: Select Preset 1 - 6 keys for DOP settings / Press RETURN key to default settings.
Operation
1
DOP Setting 1
2
DOP Setting 2
3
DOP Setting 3
4
DOP Setting 4
5
DOP Setting 5
6
DOP Setting 6
RETURN Return to default settings
4.7
Diagnostic Data Mode Specification
Press and hold [RETURN] key and [ACCENT] key for 7 seconds.
(It is necessary to connect tuner box sold separately)
4.7.1 Default status immediately after the mode activation
It shall be same as the normal activation.
4.7.2
Mode structure
Diagnostic Data Mode is only enabled in Sirius XM source.
4.7.3
Mode content
Syscon shall display the following information after entering this mode.
Display content
D
I
A
G
M
O
D
4.7.4 Display mode available during Diagnostic Data Mode
In Diagnostic Data Mode, the display can be switch between Diagnostic Mode display and normal mode display using [DISP] key.
The default display mode upon activation is Diagnostic Mode display.
Operation
Diagnostic Mode Display
DISP (Toggle)
Normal Mode Display
The display is released when another operation is executed.
Display content
D
O
P
S
D
O
P
S
D
O
P
S
D
O
P
S
D
O
P
S
D
O
P
S
R
E
S
T
O
The display is display for 1 second.
E
Display content
S
I
G
#
#
#
#
#
(No.WA049<Rev.001>)21/26
Details
E
T
1
E
T
2
E
T
3
E
T
4
E
T
5
E
T
6
R
E
D
Details
X
#
#
#
#
#
#
#
#
#
#
Details
Remove all DEMO MODE related items
Change to COLOR 12
R=0; G=9; B=7 (Aqua Blue)
Remove all DEMO MODE related items
Change to COLOR 10
R=0; G=2; B=9 (Blue2)
Remove all DEMO MODE related items
Change to COLOR 23
R=9; G=2; B=0 (Orange1)
Remove all DEMO MODE related items
Change to COLOR 24
R=9; G=1; B=0 (Deep Orange)
Remove all DEMO MODE related items
Change to COLOR 01
R=9; G=0; B=0 (Red)
Remove all DEMO MODE related items
Change to COLOR 18
R=0; G=9; B=0 (Green)
Restore DEMO MODE related items
Change to VARIABLE SCAN
Details
Default display in diagnostic mode.
Depending on display pattern in normal mode.
Hide quick links:
Advertisement
Table of Contents
