Kenwood KDC-U556BT Service Manual page 10

(2) Remove the HC CL. base from the holes on the TM base.
(See Fig.9)
Fig.9
(3) Remove the two screws D attaching the spindle motor.
(See Fig.10)
D
Fig.10
3.2.5 Removing the Loading motor
(1) Remove the roller arm assembly from the bottom frame as-
sembly. (See Fig.11)
(2) Remove the two screws E attaching the loading motor as-
sembly, and then remove the loading motor assembly in
the direction of the arrow. (See Fig.12)
E
(No.WA049<Rev.001>)10/26
Fig.11
Fig.12