Analog Output 45 - Philips DVD962SA Owner's Manual
Digital video disc player
Hide thumbs
Also See for DVD962SA:
- Technical specifications (2 pages) ,
- Service manual (158 pages) ,
- Owner's manual (32 pages)
Table of Contents
Advertisement
If you connected the red and white AUDIO OUT jacks on the Player to a
Stereo Receiver or TV, or if you used the MULTICHANNEL AUDIO OUT
jacks as shown on page 14, choose a setting for Analog output.
First, make sure you did not use the COAXIAL or OPTICAL DIGITAL
AUDIO OUT jacks.
Then, check your Stereo Receiver and see if it is compatible with Dolby
Surround or TruSurround. Then follow the steps below to choose the
Analog output setting that is most compatible with your audio equipment.
1
Press SYSTEM MENU, then press ; to select V V .
2
Press 9 repeatedly to select q, then press :.
3
Analog output will be selected; press :.
4
Press 8 or 9 to select Stereo, Dolby Surround, 3D sound, or
Multi-channel, then press OK.
G
Select Stereo if your audio equipment is not compatible with either
Dolby Surround or TruSurround, or if you connected the Player to a
TV only.
G
Select Dolby Surround if your audio equipment is compatible with
Dolby Surround. If it is, usually a Dolby Pro Logic logo will appear on
the equipment.
G
Select 3D sound if the audio equipment is TruSurround compatible.
Again, the audio equipment likely will be labelled with the TruSurround
logo as shown below.
G
Select Multi-channel if you connected the Player to a 6-channel
Receiver using the MULTICHANNEL AUDIO OUT jacks as described
on page 14. Remember to go to page 46 later to adjust your speakers.
V
W
X
Y
Z
}
a
1
2
1en
off
no
off
p
Analog output
s Stereo
Night mode
Dolby Surround
q
Karaoke vocal
3D sound
Speakers
Multi-channel
r
s
5
Press SYSTEM MENU to remove the menus.
TruSurround and the
symbol are trademarks of SRS Labs, Inc.
TruSurround technology is incorporated under license from SRS Labs, Inc.
L
Analog Output 45
1,5
T-C
RESUME
1
4
7
RETURN
DISC
MENU
1-4
É
G
STOP
Ç
SUBTITLE
ANGLE
REPEAT
REPEAT
A-B
Helpful Hints
• To set Analog output in the
Menu Bar, press SYSTEM
MENU, then press : repeat-
edly to select d. Press 8 or 9
to select st (stereo), sur (Dolby
Surround), 3d (TruSurround),
or 6ch (multi-channel). Press
SYSTEM MENU to remove the
Menu Bar.
• Or, set Analog output by
repeatedly pressing the
SOUND MODE button on the
front of the Player to select st,
sur, 3d, or 6ch in the Menu
Bar. (This is not accessible dur-
ing SACD playback. Details are
on page 44.)
• If you select Multi-channel,
Dolby Pro Logic is active when
playing a stereo-formatted disc.
POWER
2
FTS
SOUND MODE
2
3
5
6
8
9
DISPLAY DIM
0
SYSTEM
MENU
É
OK
H
PLAY
PAUSE
Å
É
ZOOM
AUDIO
SHUFFLE
SCAN
Advertisement
Table of Contents
