Helpful Hints - Philips DVD962SA Owner's Manual

32 Access Control (cont'd)
Locking or Unlocking Specific Discs
Not all DVDs are coded with rating information or Parental Control levels. You
may choose to specifically lock or unlock a Disc by choosing Play once or Play
always. This way, you can disable viewing regardless of the rating of the DVD.
You will need to know your 4-digit code.
The DVD Player can memorize Lock/Unlock settings for 120 Discs. A Disc is
memorized when you select Play Always. Playing an unlocked Disc will place it
at the top of the list. When the list is full and a new Disc is added, the last Disc
in the list will be removed from the list.
1
Insert a Disc. The Access Control message will appear on the TV screen.
PIN will appear on the display panel of the DVD Player.
locked
Access Control
|
p Play once [ ] [ ] [ ] [ ]
Play always [ ] [ ] [ ] [ ]
Choose 'Play always' to insert the disk in
the child-safe list
2
Press the o or p button to select Play once or Play always. Then,
press the Number buttons to enter your four-digit code.
G
If you select Play Once, the Disc can play as long as it is in the DVD
Player and the DVD Player power is On.
G
If you select Play Always, the Disc will play always, even if you set Child
Lock to Ç (Locked). Details are on page 31.
3
If you later decide to lock the Disc so that it will not play always:
When you insert the Disc, playback begins automatically and { { appears on
the TV screen. Press the STOP C button while { { is on the TV
screen. The locked symbol | | will appear. If the Disc continues playing,
press the STOP C button again to stop playback. You may need to turn off
the DVD Player or remove the disc before the Disc is completely Locked.
The next time you turn on the DVD Player, the Disc will not play unless
you enter the four-digit code.
POWER
2
FTS SOUND MODE
T-C RESUME
1 2
2
4 5
7 8
RETURN DISPLAY DIM
0
DISC SYSTEM
MENU
2
É
OK
G
PLAY
STOP
3
Ç
É
SUBTITLE ANGLE ZOOM
REPEAT REPEAT SHUFFLE
A-B

Helpful Hints

• The Access Control screen will
appear when you try to play a
Locked Disc. If you do not know
your code, press STOP ç C . Then,
select Access Control as described
in steps 1-3 on page 30. When
you are asked to enter the code,
press STOP C four times. Press
SYSTEM MENU, then press PLAY
B to start playback.
• Two-sided DVDs may have a dif-
ferent ID for each side. To unlock
the entire Disc, unlock each side.
• Multi-volume Video CDs may
have a different ID for each vol-
ume. To unlock the complete set,
unlock each volume.
3
6
9
MENU
É
H
PAUSE
Å
AUDIO
SCAN